Re: Hard Drive size limitation



After the install you can apply the reghack in this article.

48-Bit LBA Support for ATAPI Disk Drives in Windows 2000
http://support.microsoft.com/?id=305098

To do a clean install, either boot the Windows 2000 install CD-Rom or setup
disks. The set of four install disks can be created from your Windows 2000
CD-Rom; change to the \bootdisk directory on the CD-Rom and execute
makeboot.exe (from dos) or makebt32.exe (from 32 bit) and follow the
prompts.

When you get to the point, delete the existing NTFS and or other partitions
found. After you delete the partition(s) abort the install, then again
restart the pc booting the CD-Rom or setup disks to avoid unexpected drive
letter assignments with your new install.

You didn't mention the drive controller (possibly SCSI, or ultra DMA, or
ATA100, or raid, or serial ATA), but you may need to boot the Windows 2000
setup disks or CD-Rom and *F6* very early and very important (at setup is
inspecting your system) in the setup to prevent drive controller detection,
and select S to specify additional drivers. Then later you'll be prompted to
insert the manufacturer supplied Windows 2000 driver for your drive's
controller in drive "A"

If you wait and then S to specify additional drivers, then it may be too
late as Windows 2000 Setup at this point may have already assigned the
resources your drive's controller is wanting to use.

Be sure to apply these to your new install before connecting to any network.

http://download.microsoft.com/download/E/6/A/E6A04295-D2A8-40D0-A0C5-241BFECD095E/W2KSP4_EN.EXE
http://www.microsoft.com/technet/security/bulletin/MS03-043.mspx
http://www.microsoft.com/technet/security/bulletin/MS03-049.mspx


--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

"Tom" wrote:
| Hi,
| I'm trying to install a fresh copy of win2k pro on a new drive. The drive
is
| 250gb, but the problem is that my Win2k cd is only sp1. According to what
ive
| seen in other posts and this:
| http://support.microsoft.com/default.aspx/kb/305098/EN-US/
| sp will fix it, but then what? Does the extra space just magically appear?
| or do i need to do anything special?
| Thanks in advance


.



Relevant Pages

  • Re: 2 SATA drives and 1 IDE drive Not Recognized
    ... I tried to install the motherboard driver utility from the original CD- ... ROM within Windows. ... LifeGuard to find out if it sees the drives. ... Then just update the drivers if newer versions are available on the web site ...
    (microsoft.public.windowsxp.general)
  • Re: 2 SATA drives and 1 IDE drive Not Recognized
    ... I tried to install the motherboard driver utility from the original CD- ... ROM within Windows. ... LifeGuard to find out if it sees the drives. ... Then just update the drivers if newer versions are available on the web site ...
    (microsoft.public.windowsxp.general)
  • Re: 2 SATA drives and 1 IDE drive Not Recognized
    ... I tried to install the motherboard driver utility from the original CD- ... ROM within Windows. ... LifeGuard to find out if it sees the drives. ... Then just update the drivers if newer versions are available on the web site ...
    (microsoft.public.windowsxp.general)
  • Re: Can Only Boot with Boot CD in Drive
    ... install are pointing to the wrong drive, because when you installed the 2nd Windows, THAT became the C: ... When I insert the Recovery disk to re-install windows, it always refers to my drives backwards ... ... Place the drive on which you want to install Windows at the Master position on the Primary IDE controller. ... When you say "Place the drive on which you want to install Windows at the Master position on the Primary IDE controller", I'm not really sure I know how to do that. ...
    (microsoft.public.windowsxp.general)
  • Re: Can Only Boot with Boot CD in Drive
    ... The boot files remained there when you reinstalled to the wrong drive. ... are pointing to the wrong drive, because when you installed the 2nd Windows, THAT became the C: ... When I insert the Recovery disk to re-install windows, it always refers to my drives backwards ... ... Keep the other driveOUT of the machine until you have Windows installed properly and up and running, these other drives can be brought online after you install Windows. ...
    (microsoft.public.windowsxp.general)