Re: No login dialog after Running VNC



"j9" wrote:

> My 1st question would be: Why not use Remote Desktop and an RDP client
> instead of VNC?
>
> If you're committed to VNC, I'd recommend TightVNC 5.
>
> "Dan D." <Dan D.@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
> news:0F3F5167-4CA4-4123-AA16-4032CDE8CE13@xxxxxxxxxxxxxxxx
> > This is a long one.
> > I have a system running Windows 2000 pro and using one of RealVNC 4 or
> > Radmin. The system boots normally with the monitor, keyboard, mouse
> > connected
> > and VNC starting as a service. VNC works, I can connect to the system do
> > what I need to, log out and discconect. I can go back to the system and
> > use
> > it normaly using the connected monitor, kb, mouse with no problem. If I
> > disconnect the monitor, keyboard and mouse. Boot the system, connect with
> > VNC, the system connects and functions as expected. But if i go back and
> > reconnect the monitor, kb, and mouse and reboot I get no display. It looks
> > as
> > though It's booting normally. I get the bios post, Windows boots, the
> > windows
> > spash screen appears and when I'd expect to see it change to the windows
> > logon dialog it goes blank and the video signal drops. If I boot in safe
> > mode and uninstall the display addapter and rediscover/install it again
> > and
> > reboot I get the logon screen . I've searched the groups and Knoledge base
> > with no useful results.
> > Any suggestions would be appretiated.
> > Dan D.
>
>
> we are not commited to VNC. Just on a very low budget. We are using Windows 2000 Pro does remote desktop work on that? If it does then we would use that.
Tks,
Dan
.

Relevant Pages

  • No login dialog after Running VNC
    ... The system boots normally with the monitor, keyboard, mouse connected ... VNC works, I can connect to the system do ... I get the bios post, Windows boots, the windows ...
    (microsoft.public.win2000.general)
  • Re: No login dialog after Running VNC
    ... If you're committed to VNC, ... The system boots normally with the monitor, keyboard, mouse ... > it normaly using the connected monitor, kb, mouse with no problem. ... I get the bios post, Windows boots, the ...
    (microsoft.public.win2000.general)
  • Re: No login dialog after Running VNC
    ... >> My 1st question would be: Why not use Remote Desktop and an RDP client ... >> If you're committed to VNC, ... >>> it normaly using the connected monitor, kb, mouse with no problem. ... I get the bios post, Windows boots, the ...
    (microsoft.public.win2000.general)
  • RE: booting ubuntu without a monitor
    ... wanted to switch to Ubuntu or Debian. ... vnc, and all was well until I booted without the monitor. ... Debian Etch, on the other hand, did everything I wanted. ...
    (Ubuntu)
  • Re: booting ubuntu without a monitor
    ... Ubuntu 8 - will not boot up without a monitor, stopping kdm allows it to ... started and no GUI available with vnc. ... Can you paste the contents of your vnc config file from your home ...
    (Ubuntu)