Re: Oops! Trap error....

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Eugene Taylor (ewtaylor2001_at_fake.com)
Date: 01/19/05 

Date: Wed, 19 Jan 2005 16:56:44 -0500

If you have a spare harddrive I would install to that and then slave out the
original disk as a d drive and copy everything you need off it.
<thedeepabyss@whoever.com> wrote in message
news:1106151979.613240.38940@z14g2000cwz.googlegroups.com...
> My 6 month old system (Athlon 1600+, Chaintech Nforce2 Ultra MB, 512mb
> DDR-2100 ram, old ATA66 13GB HDD), running Win2K has given up the ghost
> - a "Trap 00000002" error first, followed by a "trap 00485872" (or
> something like that - I can't remember) after resetting the BIOS. I
> tried the usual things - repaired Win2K with recovery console, tried
> replacing the system file, etc. I also tried swapping out ram, I
> swapped out the processor, and now I've even tried a different MB.
> Still a trap error - now it's "Trap 0000000D", though. I haven't yet
> tried a new IDE cable or HDD, I don't have any errors on CHKDSK under
> recovery console. I'm not willing to try FIXBOOT or FIXMBR; I want to
> back up my data first.
>
> Thus, my main question - Can I attach a USB external HDD under recovery
> console? I can access all the files on the HDD under the repair
> console, it would be by far easiest for me to just attach my backup
> external drive and XCOPY away, if possible.
>
> My secondary question is - does anyone have any references for these
> trap errors? I haven't been able to find out anything about them, other
> than what's in USENET; and every post has a different interpretation.
> Thanks for any info!
> ECM
>

Relevant Pages

  • Re: New HDD Installation
    ... I entered the repair console and pressed F6 ... while your installation is up and running use the Disk Management ... Description of the Windows XP Recovery Console ... if it gets the new HDD in and the small out. ...
    (microsoft.public.windowsxp.general)
  • Re: Catastrophic HDD Crash
    ... Attach a power "Y" connector to the power receptacle of the drive. ... Seal the bag as thoroughly as you can, ... > had a catastrophic HDD crash this PM. ... I do have all my contacts on my Pocket PC though. ...
    (microsoft.public.windowsxp.general)
  • Re: puc(4) man page update?
    ... used before pre-loaded modules are linked and/or usable. ... at which time add a low-level console device is setup. ... sioand uartneed to be compiled into the kernel. ... attach must be compiled into the kernel as well. ...
    (freebsd-current)
  • Re: transferring 360 arcade games
    ... The memcard is on his console. ... Go round your mates house with your HDD with your profile on it and some XBLA games you've bought. ... If it was as simple as redownloading XBLA games to any console you choose to put your HDD on, then the world would only ever need to buy one copy. ...
    (uk.games.video.misc)
  • Re: Debug Windows Services
    ... Start the service in the Service Control Manager and attach the VS ... It's much easier to debug a console application. ...
    (microsoft.public.dotnet.languages.vb)