Re: apropos [Q249321]

From: student (no-spam_at_sonic.net)
Date: 08/14/04


Date: Sat, 14 Aug 2004 05:43:39 GMT


Thanks, I'll try that and report back.

I am amazed anyone replied.

The subject was supposed to say "apropos Q249321"!

Bill

Steve wrote:
> You could try editing the boot.ini file arc path to point to the new boot
> partition
> some resources
>
> http://support.microsoft.com/default.aspx?scid=kb;en-us;q102873
>
> http://www.windowsitlibrary.com/Content/315/13/3.html
>
> http://labmice.techtarget.com/windows2000/install/bootini.htm
>
> You will need to create a boot disk using ntfspro to mount the ntfs drive
> first
> http://www.sysinternals.com/ntw2k/freeware/ntfsdos.shtml
>
> Or you could try performing a parallel install and boot into that and repair
> the arc path that way here is a link on completing this for a stop error
> http://support.microsoft.com/default.aspx?scid=http://support.microsoft.com:80/support/kb/articles/Q294/7/28.ASP&NoWebContent=1
>
>
>
> hth
> rgds
> Steve
>
>
>
> "reader" <no-spam@sonic.net> wrote in message
> news:tJWSc.7250$54.110330@typhoon.sonic.net...
>
>>I am in the midst of sorting out the famous
>>
>>"Unable to Log on if the Boot Partition Drive Letter Has Changed"
>>[Q249321]
>>
>>problem, which up until an hour ago I did not know existed.
>>
>>One of the ways of dealing with this problem that I have seen
>>mentioned is to do an In-Place Windows Upgrade, and at the tail-end of
>>the description of what an In-Place Upgrade does and does not do, it
>>says this:
>>
>>"Reenumerates and changes drive letters, based on the current drives and
>>partitions that are seen during the in-place upgrade and on the rules
>>that are documented in the following article in the Microsoft Knowledge
>>Base:
>>
>>234048 How Windows 2000 assigns, reserves, and stores drive letters"
>>
>> My question is, is there any way I can get Windows2000 to
>>do this enumerating and assigning of drive letters "based in the current
>>drives and partitions" without doing an In-Place Upgrade?
>>
>> Thank you.
>>
>> Reader
>
>
>



Relevant Pages

  • Re: wont boot troubleshoot guide
    ... Thank you, Steve T. ... Then I could insert a CD with the Ultimate Boot Disk ... Disable automatic restart on system failure. ...
    (microsoft.public.windowsxp.general)
  • Re: Should I have a boot.ini? How can I set SAFEBOOT without boot.
    ... Dear Steve: ... I did safeboot anyway, simply by clicking "F8" at boot time and then ... every time I boot the PC I get a message saying that no boot.ini was ...
    (microsoft.public.windowsxp.general)
  • Re: Mirroring
    ... As the article said,"If you now want to boot from the new mirrored disk, ... you have to change the Boot.ini ARC path that points the computer to the ... Vincent Xu ...
    (microsoft.public.windows.server.general)
  • Re: [SLE] SYSTEM WILL NOT BOOT
    ... On Saturday 26 March 2005 11:21 pm, steve nutt wrote: ... It stops shortly after the grub boot loader ... This is our production mail server. ... First I would boot from the dvd and start the install routine. ...
    (SuSE)
  • Re: how make W2000 Startup Floopy Disk?
    ... > hi Herb Martin ... > but i'm change active partition from C to D ... > then i can't boot from D, ... Here's some links to help explain the ARC path in the boot.ini file and it's ...
    (microsoft.public.win2000.security)