Re: The instruction at "0x70d62832" referenced memory at "0x00000008". The memory could not be "written"

From: Gerhard (gerhardpremovethis_at_inch.com)
Date: 04/22/04 

Date: Thu, 22 Apr 2004 16:24:21 -0400

Dave,

Yes, that is correct, it does disable thumbnails. But now you can go back
re-enable it, and take out the offending .XML key. Glad to hear it worked,
gives me hope.
You guys must have been crashing left and right for you to determine so
quickly that it is fixed.
I was crashing once a day, every two days, and on rare occasions I managed
to stay up for three days. That's why I want to see it stay up for a week
or longer before I'll call it fixed.

Gerhard
"Dave" <admin@ad.min> wrote in message
news:OHRYpgIKEHA.2692@tk2msftngp13.phx.gbl...
> I tried his fix on one of my workstations. The user told me that it fixed
> the problem, but it disabled thumbnails in explorer.
>
> "Gerhard" <gerhardpremovethis@inch.com> wrote in message
> news:eumV9XIKEHA.2704@TK2MSFTNGP10.phx.gbl...
> > Thanks George,
> >
> > I have decided to use the sledge hammer. However, it will take about a
> week
> > to determine if that fixed it.
> > I googled this issue all the way back to last summer, and I have read
all
> > your posts. I noticed that nobody ever posted back to indicate whether
it
> > fixed their problem or not. I will post back in about a week, or sooner
> if
> > it did not fix it.
> > In looking at my event log I see that I was crashing with just about any
> > application that I ever use, VB6, Access 2000, Outlook Express, IE6 and
> > svchost. Sometimes the instruction points to itself, sometimes to a
zero
> > address, and sometimes to an apparently good address.
> > I do not have to be working with XML files in order for the crash to
> occur.
> > And of course I do not have thumbnail view enabled for the folders that
> have
> > XML files.
> > When it happens, it is not immediately apparent that Explorer crashed,
> > Explorer is still there. But then the machine cannot shutdown, hanging
on
> > trying to close Explorer no doubt, and it requires a hard reset then.
> >
> > Gerhard
> >
> > "George Hester" <hesterloli@hotmail.com> wrote in message
> > news:%234CIrCBKEHA.2260@TK2MSFTNGP09.phx.gbl...
> > Well it is a sledge hammer on a fly. The trouble is for me to explain
the
> > whole shebang just takes too long until I know it works. If it works
> that's
> > great and we can just regsvr32 thumbvw and put everything back to broke
> just
> > as it was before. The issue is the data that is removed from
> > HKEY_CLASSES_ROOT by unregistering thumbvw.dll. Note that unregistering
> > this actually does very little. Except fix the issue. Registering it
> back
> > will just result in the issue again. But sometimes it doesn't. In fact
> > sometimes it fixes the issue entirely.
> >
> > But if you don't want to use the sledge hammer approach here is the fix
> with
> > a fine tooth comb:
> >
> > HKEY_CLASSES_ROOT\.xml\ShellEx\{BB2E617C-0920-11d1-9A0B-00C04FC2D6C1}
> >
> > Remove the data in that key in the registry. Note if you have installed
> > cumulative updates for IE 6 from the first half of 2003 then to fix the
> > issue IE 6 will need to be removed first. It is really mshtml.dll.
> >
> > --
> > George Hester
> > __________________________________
> > "Dave" <admin@ad.min> wrote in message
> > news:u0Pmhk6JEHA.1892@TK2MSFTNGP09.phx.gbl...
> > > Yeah how will this effect the system?
> > >
> > > "Gerhard" <gerhardpremovethis@inch.com> wrote in message
> > > news:%23gdo3f6JEHA.3016@tk2msftngp13.phx.gbl...
> > > > George,
> > > >
> > > > Can you expand on that a little? I couldn't find anything in the
KB.
> > > > Will thumbnail view still work in Explorer after unregistering it?
> > > >
> > > > Same problem here, I am also working with XML in Visual Studio,
> getting
> > > lots
> > > > of these errors.
> > > >
> > > > Gerhard
> > > >
> > > > "George Hester" <hesterloli@hotmail.com> wrote in message
> > > > news:O5pYSw0JEHA.2060@TK2MSFTNGP11.phx.gbl...
> > > > Ans: Internet Explorer 6.
> > > >
> > > > Workaround: Start | Run | regsvr32 /u thumbvw.dll | OK | OK.
> > > >
> > > > --
> > > > George Hester
> > > > __________________________________
> > > > "Dave" <admin@ad.min> wrote in message
> > > > news:eJzEPIuJEHA.556@TK2MSFTNGP10.phx.gbl...
> > > > > One of my Windows 2000 workstations receives this error when
> > > manipulating
> > > > > XML file with notepad, wordpad and MS Visual Studio 2003.
> > Explorer.exe
> > > > > needs to be restarted after this error. What would cause
something
> > like
> > > > > this? I disabled all unneeded programs and services from startup,
> and
> > > it
> > > > > has all the windows updates installed.
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • Re: The instruction at "0x70d62832" referenced memory at "0x00000008". The memor
    ... > Yes, that is correct, it does disable thumbnails. ... >> I tried his fix on one of my workstations. ... but it disabled thumbnails in explorer. ... >>> George Hester ...
    (microsoft.public.win2000.general)
  • Re: Rant against automake
    ... community doesn't fix automake. ... is to get suggestions on how to fix my problems. ... On my last project we were building software for a Linux based ... > If you want an xml based build tool, take a look at Apache Ant. ...
    (comp.os.linux.development.apps)
  • Re: File Association - XML
    ... XML works fine from both Windows ... I was able to open xml file from Windows Explorer by double ... I double click the file on the intranet as well. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: ReadXML True vs true
    ... > The issue I have is that sometimes the XML is edited manually. ... > to see if a fix exist out there for it. ... file into a string, do any necessary replacements, and then ...
    (microsoft.public.dotnet.languages.csharp)
  • Re: How to replace attributes special characters using XMLTextReader
    ... I am asking for any suggestions to fix the attribute mess a not the ... Then what the other side sends is not XML at all. ... XML characters within any double-quote-enclosed string, ...
    (microsoft.public.dotnet.xml)