Raid Disk Error: The Device, is not ready yet

amilhouse_at_audaxgroup.com
Date: 03/11/04 

Date: Thu, 11 Mar 2004 13:00:40 -0800

Over the past two days at around 12:00 AM, One of my
servers has been receiving the following error:

Event ID: 15
Source: Disk
Description: The device, \Device\Harddisk0\DR0, is not
ready for access yet.

This server does have a raid configuration.

What would cause this message to be generated? What do I
need to do to make it stop?

Relevant Pages

  • Re: How to verify/fix High Disk Read Latencies in Exch2003 ?
    ... Exchange production servers are, the SAN is an EMC CX600. ... >>> current log file on disk and continues until data in the log buffers ... Comingling occurs whe two or more LUNs reside ...
    (microsoft.public.exchange.admin)
  • Re: 2003 Enteprise SP2 or 2003 Enteprise R2
    ... If you run setup from disk 2 of the R2 set it will install this: ... SP 2 on *all* Win 2k3 servers. ... SP 2 is an OS upgrade that should be ...
    (microsoft.public.windows.server.general)
  • Re: LVM Documentation
    ... what were you trying to do with your disk? ... DiskSuite isn't really intended to do quite as much as HP-UX LVM. ... that mirroring the boot drives should be done in hardware, ... where there was not yet any functional network and the servers had no ...
    (comp.sys.hp.hpux)
  • Re: HBA connection
    ... In Windows Server 2003 Cluster server has a switch that when enabled, ... cluster-managed disk. ... > We bought new IBM Blade servers and putting in production> soon. ... I have a basic question about the clustering> servers, many places Microsoft recommended OS and Shared> Disk should be connected in different SCSI cards. ...
    (microsoft.public.windows.server.clustering)
  • Re: SSA disk sharing
    ... Taken from the SSA Users' Guide: ... you are allowed a max of 2 servers in the loops. ... I would create a vg just for that logical disk. ... > from one host to all other hosts connected to the same disk drive. ...
    (AIX-L)