Re: Very slow boot up

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: Josef Stalin (UnionofSovietSocialistRepublics_at_yahoo.com)
Date: 02/22/04


Date: Sun, 22 Feb 2004 09:18:38 -0500


"Richard Moreno" <richard.moreno-spam@hp.com> wrote in message
news:e6JDNO%239DHA.340@tk2msftngp13.phx.gbl...
> Hi Catherine-
>
> Dependant on your hardware specs bootup times will definitely vary. While
> the min. req. by MS are posted here:
>
http://www.microsoft.com/windows2000/professional/evaluation/sysreqs/redir-sysreqs.asp
>
> Anyone whose dealt with W2K will tell you that's just enough to get
started.
> In my experience it runs optimally on:
> P3 400 or better
> 256 MB RAM (the more the better but this is minimum)
> 10 GB HDD (1 GB free)
>
> Other than that, W2K has alot to load during bootup. You could try
> minimizing the amount of services you have starting during bootup as well.
> Also, check into your Armada's BIOS. Make sure you've got the latest.
>
> --
> Thanks,
> Richard Moreno
> MCSE, MCSA, Server+, Network+
>
> *This posting is provided "AS IS" with no warranties, and confers no
> rights.
>
>
>
> "Catherine" <anonymous@discussions.microsoft.com> wrote in message
> news:132fe01c3f7de$645e5510$a101280a@phx.gbl...
> > I have win 2000 prof. running on a stand alone compag
> > armada laptop but it takes forever to boot up any ideas.
> > Thanks in advance.
>
>

Greetings Comrades,

Huh, a 10GB HDD is going to cause W2K to boot up faster than, say a 5GB
HDD? Oh, what rubbish!

Here's what I'd do:

Make sure that you only have the minimum number of services running. Fast
Indexing (what a joke) can greatly slow a computer down.

Some anti-virus programs can also greatly slow down a computer when they're
running in full scan mode. Disable the full-scan mode for the time being.

Make sure that you've run your computer through SpyBot and Adaware (free)
to get rid of any parasites. Before running the programs, make sure you've
downloaded the latest definition files. Parasites, and it doesn't take too
many, can cripple your computer.

Get Startup.exe (http://www.mlin.net/StartupCPL.shtml) -- free. Disable as
many processes as possible. If you're starting 15 additional programs, of
course it's going to take forever to boot up your computer. startup.exe is a
great program. You simply uncheck the processes you don't want to start and
if it turns out to be necessary, you just check it again. Very painless.
Uncheck as many processes as possible.

If you can afford it, max out your laptop memory to 512MB. This almost
always has the greatest return on investment. My old 433MHz desktop
computer with lots of memory and a fast hard disk is now quite spunky. It
boots up W2K quite quickly. It used to be a real dog until I added a lot
more memory.

Erase your temp directories. (I remove the entire directory.) I've come
across some users whose temp directories were positively huge. 100's of MB.
Since W2K and some applications need the temp dir's, reboot the computer
afterwards and the temp dir's will be automatically rebuilt.

Updating your BIOS is never a bad idea, but I'll bet my puppy it won't have
any effect upon your bootup performance.

Then defrag your hard disk. This is not a bad idea (I do it all the time),
but it won't give you the dramatic performance gain that many would lead you
to believe.

Uncle Joe



Relevant Pages

  • Re: Sudden Bootup failure.
    ... Hitting the reboot button and the F8 key gets me: ... The boot up fails after the initial drive search including the floppy ... I do run two SATA drives with the boot partition on the primary drive. ... The BIOS bootup is set to boot from HDD as it has always been. ...
    (microsoft.public.windowsxp.general)
  • Re: DEC 3000/900 bootup problem
    ... Some updates on my bootup problem... ... I ordered a replacement I/O board. ... get attempt to boot. ... As far as I can tell this replacement board is defective. ...
    (comp.os.vms)
  • Re: Windows will not start: bootup resets itself!
    ... With some keyboards you have to press the F Lock key before other function ... How was the dual boot created? ... Inserting the blank harddrive causes the "bootup faillure" message, ... the recent setup and the previous Windows XP only. ...
    (microsoft.public.windowsxp.basics)
  • Re: Windows will not start: bootup resets itself!
    ... How was the dual boot created? ... Inserting the blank harddrive causes the "bootup faillure" message, ... the recent setup and the previous Windows XP only. ... Both images was created when the system was still virgin. ...
    (microsoft.public.windowsxp.basics)
  • Re: Disk Error-Checking
    ... Actually, I tried disabling it at boot, but that didnt' ... bootup a la win.ini back in the old days of Windows? ... Set ZA to load at startup, ...
    (microsoft.public.windowsxp.perform_maintain)