RAID controller change
- From: "QUIMERA" <quimera@xxxxxxxxxx>
- Date: Wed, 27 Jun 2007 13:25:56 +0200
Hi,
I need to change an Adaptec RAID controller and its set of HDD for others
and I have the next problem.
Scenario: Windows 2000 Server SP4 working on a server with Adaptec RAID
controller (RAID 5), let's say A RAID
Test phase #1: I have copied (Ghost) the discs on the RAID on a single IDE
HDD. Test were successful and the server works fine, but slower (normal).
Test phase #2: I have mounted a new RAID (in that case is a RAID 1,
mirroring), but the test were unsuccessful. When I try to boot the server,
everything goes fine until the Windows screen passes (I can see the Windows
screen with the progress bar on the bottom). I get a blue screen with the
INNACCESSIBLE_BOOT_DEVICE error. I guess this error is produced by the RAID
controller or a missing controller driver.
Future: I want to mount the current set of partitions on a new RAID
controller (Adaptec, RAID 5) with a new set of bigger and fater HDD.
Up to now, I tried to boot from a floppy (I cannot, I get I/O error -I guess
the boot.ini has been right configured, even I changed some times the
configuration-), I also tried to include on c:\ (in the mirror) the
ntbootdd.sys file (it is a renamed driver for the RAID controller I'm
using).
I guess the problem is at the RAID controller so, how can I make it work?
If the problem is not in the RAID controller, any other solution?
Many thankx,
QUIMERA
.
- Follow-Ups:
- Re: RAID controller change
- From: QUIMERA
- Re: RAID controller change
- Prev by Date: Re: xcacls
- Next by Date: Re: RAID controller change
- Previous by thread: xcacls
- Next by thread: Re: RAID controller change
- Index(es):
Relevant Pages
|
