Re: Fail to remirror > 1TB Volume


Any luck finding more info on this?


Jon Roberts wrote:
> *Hi there,
>
> I am testing the capability of the MS iSCSI initiator (1.05a) on
> Win2k
> against two iSCSI targets (EqualLogic). I have created dynamic disks
> on two
> initiator connections (yes, I am aware that dynamic disks are not
> officially
> supported yet, but there is no directive not to use them). Mirrors
> up to
> 1TB work no problem.
>
> Everything works fine until I attempt to re-mirror a volume of
> greater than
> 1TB capacity. The mirror resync gets to exactly 1TB through, then
> simply
> ends - leaving the mirror I was trying to add completely empty with
> no errors
> in the event logs at all. Searching the knowledge base, I came
> across the
> exact sypmtoms in article
> http://tinyurl.com/cdft3 The newer
> dmio.sys patch was applied and the server rebooted, but the failure
> remains
> exactly the same. The symptoms match mine perfectly - a virgin
> mirror
> creation works fine, but breaking/re-attaching fails.
>
> I tested the same scenario on Windows 2003 Enterprise and found the
> same
> issue there as well - no KB article exists for the problem on Win2k3
>
> The question is - does the same bug in Article 827913 exist in Win2k3
> as
> well? I looked at the pre-release SP1 beta release notes, but found
> no
> reference to a fix of this nature.
>
> I plan to use a hardware iSCSI HBA (Qlogic) for further testing and
> to rule
> out the MS initiator, but I have a suspicion that it's not the MS
> initiator
> thats at fault.
>
> Other experiences greatly appreciated.
>
> - Jon. *



--
delorean7
------------------------------------------------------------------------
Posted via http://www.mcse.ms
------------------------------------------------------------------------
View this thread: http://www.mcse.ms/message1239138.html

.