RE: diskpart
Tech-Archive recommends: Speed Up your PC by fixing your registry
Date: Tue, 31 Aug 2004 00:19:01 -0700
yes it will do Basic disk. You will have to first expand the RAID to include
that disk which is usually done with the vendors tools like HP or Dell. Once
the new drive is part of the RAID you can use the diskpart tool.
"Tina" wrote:
> I have a win2k server that has a logical F: drive that
> consists of 3 36gb scsi dirves in a raid 5 array. I have
> added another disk to the system and want to extend my
> volume on F: to include my new drive. When I open window
> LDM I am able to see the new disk, but I am not able to
> extend F: to include the new disk because F: was setup as
> a Basic disk instead of a Dynamic disk. Will
> diskpart.exe do this? I'm not sure if it will only extend
> the volume to add additional space on the current disk or
> if it will allow me to add an additonal disk. Any info
> would be greatly appreciated. Thanks.
>
Relevant Pages
- slackware 9.1 software raid problem
... Setting up a RAID system with Slackware 8 is not extremely difficult once ... mirroring the root partition and booting from that mirror was not possible. ... Each disk is attached to a different IDE chain on the motherboard. ... The ability to boot from the Slackware 8 install CD. ...
(alt.os.linux) - Re: Is it HighPoint, is it Seagate, or is it Windows 2000 Professional
... I have really learnt about the uses and limits of RAID. ... Use all the manufacturer recommended system recovery ... provisions -- Emergency Disk, have a DOS boot disk ready, ... what could cause Windows to suddenly change its mind ...
(microsoft.public.win2000.setup) - Re: [opensuse] 10.2 no RAID to 11.0 RAID 1
... 10.2 no RAID to 11.0 RAID 1 ... you can force rebuilds in mdadm in situations where no firmware raid will ever let you. ... Send me your problem disks that you think are impossible to assemble and I bet in a little while I can tell you how to assemble the array as long as there actually is enough there to use. ... One thing I've seen, which I don't think is your problem but shows the kind of thing that happens, a disk will drop out of the array and reappear instantly as a higher drive letter than the system really has. ...
(SuSE) - LVM on SW RAID for sarge - success
... I've just had success migrating Debian Sarge to root on LVM on RAID. ... First make sure the SCSI BIOS boots from the first disk. ... I made reiserfs on all the filesystem partitions and completed the ... The remaining two disks were partitioned and used to create RAID arrays ...
(Debian-User) - Re: Platzierung und Größe der Auslagerungsdatei
... der Controller steckt, ... Bei der Latency ist die Raptor um Faktor 1,4, bei der Seektime um Faktor ... We recommend that you plan to use less than 80% disk utilization at ... Raid 0 has the same cost as no raid. ...
(microsoft.public.de.german.windows.server.general) |
|
