Configure modem initialization

Hello,

MS Fax is using custom AT commands to init every modem used. Is there any
chance to change these settings? I have problems with one of my modems which
reports errors during init.

AT&FE0V1W
ATV1&D2&C1S0=0
ATS7=60&k4

The last command kills my modem....

Any suggestions?
Thx
René


.

Relevant Pages

  • Re: minicom serial output
    ... doesn't react and a multimeter accross the serial port shows that no data ... It also reacts to the modem ... 'D' (one of the commands recognised by my device) and I can get my device ... If you are changing the settings each time, ...
    (comp.os.linux.hardware)
  • Re: [SLE] (SOLVED!!!)(Revisited) Works in Windoze, NOT in SuSE!?!?!?!?!?!?
    ... > terminal program to allow direct keyboard input to the modem. ... > have executed my ATI commands, was to modify wvdial.conf, save it, then ... to include it in the init string. ... Heree I am talking about Windows XP. ...
    (SuSE)
  • Re: Fax, Cannot hear dial tone anymore
    ... The second bit of advice is to check your computer for malware, although I haven't heard of any malware that resets volume on modem speakers. ... Your settings for Maximum Port Speed and Dial Control are fine. ... The following may not help at all, but if you are interested in doing a few experiments with your modem, you can try issuing commands directly to the modem. ... Verify the settings on the Port Settings tab and then click OK. ...
    (microsoft.public.windowsxp.print_fax)
  • Re: USR 5699-02 modem stuck on one baud rate
    ... I have a log of what happens when the modem connects. ... Will you see some commands or replies ... settings I can find, but it still connects at 33600. ... I tried changing the baud in the ...
    (microsoft.public.windowsxp.hardware)
  • Re: minicom serial output
    ... >doesn't react and a multimeter accross the serial port shows that no data ... >initialisation / hangup commands. ... I already changed the modem initialisation string to ... present minicom configuration, go back to the default configuration ...
    (comp.os.linux.hardware)