Re: DNS Server setup

In news:ff16fb66561be8c9c73d3ce59526@xxxxxxxxxxxxxxxxxxxx,
Meinolf Weber <Meinolf Weber> typed:
Hello Donatas,

On Typhon you have the server itself as DG. Why not your router?

On Morpeus you have another DG address. x.x.x.113 Is that a router or
another server?

Better disable the NIC's that are not used on your servers.

Best regards

Meinolf Weber


I agree. Disable the additional NICs on Typhon. Multihomed DCs are very
problematic and is probably the cause of the problem.

Donatas, if you would like to have multiple NICs on the DC, I can provide
you instructions to assist in configuring the DC to work with the multiple
NICs. The instructions involve registry mods. But I believe and recommend to
only use one NIC on a domain controller to minimize domain controller
problems.

Ace




.

Relevant Pages

  • Re: Urgent! New router and big disaster
    ... NIC, you need to specify an external DNS server for DNS, instead of the ... Both NICs should point to his internal IP for DNS. ... forward ports to it reliably in the router. ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... No Phantom NICs as far as I can see. ... that it can not find the server. ... Configure your Router as an Eithernet Bridge. ... Once you have this then configure the Routers Firewall and Port ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... laptop plugged into port on DSL router. ... service, e-mail, and RWW is available to all users on the network. ... The server is a SBS2003 SP1 Standard box without ISA, ... of the two NICs by clicking the Advanced tabs, it won't open that box, ...
    (microsoft.public.windows.server.sbs)
  • Re: Still cant connect to RWW or OWA remotely
    ... The server is a SBS2003 SP1 Standard box without ISA, ... the two NICs by clicking the Advanced tabs, it won't open that box, and ... program or service is running that might use the network address translation ... Is the Modem also your Router? ...
    (microsoft.public.windows.server.sbs)
Loading