Re: DNS Setup

Jamie wrote:
* Yes Domain with DCpromo (last response)
* DNS for internal only.
* the router is providing nat and is the gateway for all the
workstations
and server
* Not sure about the last one
** I tried to change the DNS on the server to point to itself and it
could
not browse. It has to have router as pri and internet DNS as sec or
it can't
browse.. It is very strange. It is creating many problems..
Workstations
are very slow when logging in to the server. DNS problem I know.
What do I
need to change?

All servers and clients should point to the internal DNS only, if the
internal DNS is unable to resolve internet names, check for the existence of
a "." (Root) forward lookup zone, if you have one, delete it, then close and
re-open the DNS console. Check that the Root Hints are loaded and resolved,
then you can enable a forwarder to the router or ISP.

300202 - HOW TO: Configure DNS for Internet Access in Windows 2000
http://support.microsoft.com/?id=300202&sd=RMVP

--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
Send IM: http://www.icq.com/people/webmsg.php?to=296095728
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
http://message.wftx.us/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================


.

Relevant Pages

  • Re: Cannot connect to RWW from home PC
    ... eth0 172.26.0.1/16 Extra none ... That would be the address you need a DNS record for. ... One question - if I reset the Thomson Router will that clear all the ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect to RWW from home PC
    ... No 10.0.0.138 is the address used to log onto Thomson's router to make the ... On the DNS question I can add an MX record in the DNS area of GoDaddy's ... eth0 172.26.0.1/16 Extra none ... Heres' the info for our server: ...
    (microsoft.public.windows.server.sbs)
  • Re: Clients connecting to server
    ... Every dsl router is capable of turning of DHCP, ... DNS on your external nic should point to your server IP.Your external nic ... >> then the 'Connect to the internet' wizard. ...
    (microsoft.public.windows.server.sbs)
  • Re: DNS, Active Directory, and public domains....
    ... is a router maintained by the university - external IP xxx.yy.zz.aa. ... I'll install DNS & configure the W2K server to be ... the DNS server. ... >> needs to match an Internet domain. ...
    (microsoft.public.windows.server.dns)
  • Re: Urgent! New router and big disaster
    ... The SBS DNS server, running on ... its IP it means that your problem is now DNS. ... forward ports to it reliably in the router. ... I should have been more clear about internet connection.. ...
    (microsoft.public.windows.server.sbs)
Loading