Re: DNS replication on 2 domain on 2 forests

"Kevin D. Goodknecht Sr. [MVP]" <admin@xxxxxxxxxxxxxx> wrote in message
news:eg%23j5EzFHHA.3872@xxxxxxxxxxxxxxxxxxxxxxx
Nico2005 wrote:
Hi there,

I'm trying to setup 2 domain in 2 differents forests with an external
trust between both domain.

Usually you need NetBIOS to work for external trusts,
so usually you need WINS Servers when you have multiple
subnets.

All DCs and other machines need to be WINS clients if you
deploy WINS server.

These two domain are only on a switch no access to internet

Switch address 192.168.1.63

On a switch or a router?
If it is a switch, then you need to either change the address scheme to be
on the same subnet.
If it is a router, is it one router or two?

In order to have communication between the two subnets, you need two
routers
set up with routes between the routers.

Or one routers with network interfaces on each
subnet.

That is what routers do.


--
Herb Martin, MCSE, MVP
Accelerated MCSE
http://www.LearnQuick.Com
[phone number on web site]


.

Relevant Pages

  • Re: Best solution to segment subnets
    ... i have a no clear idea of this scenario, maybe so nat routers are confusing me. ... subnet 1 and subnet 2 are two room in the second floor, i need isolate them from subnet 3 and from each other. ... Three subnets need internet. ... It won't isolate the subnets if the switches are uplinked to each other. ...
    (microsoft.public.win2000.ras_routing)
  • Re: Best approach for broadcasting a notifivation to another progr
    ... I think that normally routers block all broadcasts by default, ... I have found that many admins will allow broadcasts between them (at least ... As for the Terminal server issue, I don't know how that would do. ... I have a customer that has two subnets joined by Cisco pix ...
    (microsoft.public.vb.general.discussion)
  • Re: qwest optical ethernet
    ... plug the WAN into a L3 switch so you have something isolating the subnets at ... sites behind the routers, or just flatten out your network. ... Id like to keep the subnets that we have in place now for future ... or sepearate interfaces - but you need to know which is ...
    (comp.dcom.sys.cisco)
  • Re: EIGRP Configuration Help
    ... all single-homed locations are configured as stub. ... Subnets again much similar. ... The network design is archaic and a relic of the past in terms of subnets, ... stub routing on each of these routers. ...
    (comp.dcom.sys.cisco)
  • Re: Network Configuration
    ... You have the physical topology, the logical topology, and ... cross routers, therefore the routers will recover lost bandwith. ... > We currently have three router/hub/switches one, for each floor of our> building. ... I am contemplating going to DHCP and am> interested in knowing if there is a technical reason, why I should try to> keep the subnets focused on each floor. ...
    (microsoft.public.win2000.networking)