DNS replication on 2 domain on 2 forests

Hi there,

I'm trying to setup 2 domain in 2 differents forests with an external
trust between both domain.
These two domain are only on a switch no access to internet

Switch address 192.168.1.63

1st domain

test.com

my server is configure like this
server name : test01
ip address : 192.168.1.21
dns server : 192.168.1.21
subnet : 255.255.255.0
gateway i'm not sure what i need to put (should i put 192.168.1.21 or
the switch address)

2nd domain

test2.com

my server is configure like this
server name : test02
ip address : 10.10.1.21
dns server : 10.10.1.21
subnet 255.255.255.0
gateway i put the server it self 10.10.1.21 (maybe im wrong ?)

DNS configuration
each domain as a dns server
i put primary zone as integrated AD for both
i configured a secondary zone for replication over both domain (is that
correct)

And i'm not able to ping each domain, i want to know what do i need to
do ?
Thanks

.

Relevant Pages

  • Re: ConnectComputer Problem
    ... I'm a little confused by your network configuration. ... Switch2 --- SBS Server ... switch has internet access all the time, the second switch has the client ... NICs ...
    (microsoft.public.windows.server.sbs)
  • Re: RDP Connections - Freeze or Reconnect
    ... I immediately swapped the connector and cable out and plugged the cable coming out of the switch into the spare 100mb NIC adapter but still using the connector and extra cable. ... The connection of the 100mb LAN from then on appeared much more stable. ... If I logon and test the RDP connection with a dialup modem through RRAS (Terminal server is also a RAS Server), would you expect it to misbehave if it was I switch problem? ... You mentioned seeing a red X on the server's network connection in an earlier post. ...
    (microsoft.public.windows.terminal_services)
  • Re: DNS Issue(s)
    ... My junk pile has an HP Procurve 12 port switch. ... defragging ancient workstations and the server. ... If a workstation cannot see the server then it cannot resolve a dns ... Find this server's Active Directory replication partners that run the DNS ...
    (microsoft.public.windows.server.sbs)
  • Re: Why adding secondary IP to NIC of DNS servers failed ?
    ... probably the layer 3 switch you referred to. ... unable to ping 1.0.0.200 from the DNS server if you add a 1.0.0.x address ... If only the 1.0.0.x network is having trouble, ...
    (microsoft.public.windows.server.dns)
  • Re: DNS replication on 2 domain on 2 forests
    ... Once you have the IP network working, you shouldn't have any problems communicating -- or at least surfacing a different problem. ... So, on each segment, get your Gateway correct, make sure you can ping your local switch, then the address of the opposite segment. ... > my server is configure like this ... > dns server: 10.10.1.21 ...
    (microsoft.public.win2000.dns)