Re: DNS Resolution

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

SD wrote:
My comapany's registered Domin name is [mycomany.com]. Our Internal
AD environment is [mycompay.local]. I have a Domain Environment
[dmzwebsite.local] setup in my DMZ that hosts a published web site
[mysite.mycompany.com].

Currently when my users [Internally] access mysite.mycompany.com the
name is resolved to the External IP address through our ISP's dns
etc..

Is there anything I can set up internally so when they try to access
mysite.mycomany.com the name is resolved Internally to the Internal
DMZ IP as opposed to the External IP?

Thanks -sean

In your internal DNS server create a new zone named "mysite.mycompany.com"
(Without the quotes), in that zone create a host record, leave the name
field blank, give it the address of the server hosting the site.

--
Best regards,
Kevin D. Goodknecht Sr. [MVP]
Hope This Helps
===================================
When responding to posts, please "Reply to Group"
via your newsreader so that others may learn and
benefit from your issue, to respond directly to
me remove the nospam. from my email address.
===================================
http://www.lonestaramerica.com/
http://support.wftx.us/
https://secure.lsaol.com/
===================================
Use Outlook Express?... Get OE_Quotefix:
It will strip signature out and more
http://home.in.tum.de/~jain/software/oe-quotefix/
===================================
Keep a back up of your OE settings and folders
with OEBackup:
http://www.oehelp.com/OEBackup/Default.aspx
===================================


.

Relevant Pages

  • Re: DNS Resolution
    ... I have a Domain Environment ... setup in my DMZ that hosts a published web site ... DMZ IP as opposed to the External IP? ... In your internal DNS server create a new zone named "mysite.mycompany.com" ...
    (microsoft.public.win2000.dns)
  • DNS Resolution
    ... I have a Domain Environment ... setup in my DMZ that hosts a published web site ... mysite.mycomany.com the name is resolved Internally to the Internal DMZ IP ...
    (microsoft.public.win2000.dns)
  • RE: [fw-wiz] PIX with Public DMZ
    ... > Since the DMZ will have a routable address space, ... Use nat 0 access-lists for both inside and outside from the DMZ ... (assuming you want hosts on the inside to be able to talk to the DMZ). ... interface to allow Internet traffic to those hosts. ...
    (Firewall-Wizards)
  • Re: Flat Domain DNS Problem
    ... > Servers in the domain have Active Directory - Integrate DNS enabled. ... > The problem I have is that I have 3 hosts in the DMZ in one site. ... I will also assume the DMZ in that one site is using a public IP address. ...
    (microsoft.public.windows.server.dns)
  • Re: Multiple NATs PIX 515
    ... the inside interface has no need to reach the outside. ... The dmz is trying to reach an address of 10.250.30.30. ... I currently have a static NAT which allows an outside address direct ... > If you want the inside and DMZ hosts to retain their original addresses ...
    (comp.dcom.sys.cisco)