Re: No DNS resolution with ICS

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Stephan (anonymous_at_discussions.microsoft.com)
Date: 03/23/04 

Date: Tue, 23 Mar 2004 13:02:25 -0800

>-----Original Message-----
>In news:Ow%23DDlFEEHA.3256@TK2MSFTNGP09.phx.gbl,
>Kevin D. Goodknecht [MVP] <admin@nospam.LSAOL.COM> posted
their thoughts,
>then I offered mine
>
>> Does this machine have a DNS server on it?
>>
>> Let me explain, ICS has a non-configurable DNS proxy in
it that
>> listens on port 53. a DNS server also listens on port
53 so you end
>> up with binding conflicts, that's why you can run ICS
on a machine
>> with a DNS server on it. You can however use NAT that
is in routing
>> and remote access, as long as you don't enable the DNS
proxy in RRAS.
>>
>>
>
>Kevin, I don't believe he has DNS running on this box. If
he did, he would
>be getting the NATHLP error in his event viewer, which I
think I asked him
>if he was getting any errors. Kind of getting to be a
long thread at this
>point.
>
>I hope he doesn't have DNS on this machine. That would be
the cause of the
>whole thing. I was somewhat assuming these are both Pro
machines since he
>wasn't even sure what I meant by "if AD is running".
>
>
>--
>Regards,
>Ace
>
>Please direct all replies to the newsgroup so all can
benefit.
>This posting is provided "AS-IS" with no warranties and
confers no
>rights.
>
>Ace Fekay, MCSE 2000, MCSE+I, MCSA, MCT, MVP
>Microsoft Windows MVP - Active Directory
>--
>=================================
>
>
>.
>

Ace,

To be honest, I did get a few error messages. Don't know
if they are relevant, but here they are:

On PC-1, There are two error messages that I get
frequently (like about each time the machine is booted)
- ID 3, Source cannot be found
- ID 7000, Legacy Modem Driver service failed to start

And today there was a new one that I hadn't seen before:
- ID 7011, Timeout on Dnscache

On PC-2, I get the same ID 7000 driver service errors, and
yesterday there were also these two warnings:
- ID 8021, The browser being unable to retrieve a list of
servers
- ID 3019, Failure of connection type determination

Full details, see below,

Regards,
Stephan

PC-1:

Event Type: Error
Event Source: HpSpdSys
Event Category: None
Event ID: 3
Date: 23/03/2004
Time: 10:43:38
User: N/A
Computer: VECTRA
Description:
The description for Event ID ( 3 ) in Source ( HpSpdSys )
cannot be found. The local computer may not have the
necessary registry information or message DLL files to
display messages from a remote computer. The following
information is part of the event: , Bad OS Version.
Data:
0000: 00 00 00 00 02 00 56 00 ......V.
0008: 00 00 00 00 03 00 07 c0 .......À
0010: 00 00 00 00 83 01 00 c0 ....&#131;..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 23/03/2004
Time: 10:43:43
User: N/A
Computer: VECTRA
Description:
The Microsoft Legacy Modem Driver service failed to start
due to the following error:
The service cannot be started, either because it is
disabled or because it has no enabled devices associated
with it.

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7011
Date: 23/03/2004
Time: 16:45:01
User: N/A
Computer: VECTRA
Description:
Timeout (30000 milliseconds) waiting for a transaction
response from the Dnscache service.

PC-2:

Event Type: Error
Event Source: Service Control Manager
Event Category: None
Event ID: 7000
Date: 22/03/2004
Time: 21:44:04
User: N/A
Computer: ROTTERDAM
Description:
The Microsoft Legacy Modem Driver service failed to start
due to the following error:
The service cannot be started, either because it is
disabled or because it has no enabled devices associated
with it.

Event Type: Warning
Event Source: BROWSER
Event Category: None
Event ID: 8021
Date: 22/03/2004
Time: 20:16:37
User: N/A
Computer: ROTTERDAM
Description:
The browser was unable to retrieve a list of servers from
the browser master \\VECTRA on the network
\Device\NetBT_Tcpip_{7A34795B-8151-400B-92C4-
26092D21D4DD}. The data is the error code.
Data:
0000: 35 00 00 00 5...

Event Type: Warning
Event Source: MRxSmb
Event Category: None
Event ID: 3019
Date: 22/03/2004
Time: 21:51:33
User: N/A
Computer: ROTTERDAM
Description:
The redirector failed to determine the connection type.
Data:
0000: 00 00 00 00 04 00 4e 00 ......N.
0008: 00 00 00 00 cb 0b 00 80 ....Ë..&#128;
0010: 00 00 00 00 84 01 00 c0 ....&#132;..À
0018: 00 00 00 00 00 00 00 00 ........
0020: 00 00 00 00 00 00 00 00 ........

Relevant Pages

  • Re: Unknown svchost.exe DNS port 53 network activity
    ... activity on my router as well as my PC LAN connection icon in the tray. ... port 53 with a remote address of my ISP's DNS server. ... No traffic can come to the machine, unless you have opened the inbound port ... Svchost allows the communication between machines in a LAN or WAN situation. ...
    (comp.security.firewalls)
  • RE: problems receiving e-mail to my server redux
    ... I installed BIND on my Linux box and set it up to start at every ... > To: Ed McCorduck ... > run a dns server if you want things to work. ... > which implies that you are trying to use port 80 for your dns server. ...
    (RedHat)
  • Re: SendPort
    ... If you want your DNS server should listen on port other than 53, ... the best way would be to have a firewall or set up NAT, ... on which the DNS servers is listening then what will you achieve with this? ...
    (microsoft.public.windows.server.dns)
  • Re: questionable access to my computer - please help
    ... > Download portref.zip from: wilders.org for a full port reference listing. ... > If the firewall is blocking internet access to that addy, ... even shows you that it _is_ a DNS server. ... The only question here is what is more stupid, this firewall simulation ...
    (comp.security.firewalls)
  • Re: DNS lookup not working
    ... That is exactly why it is not working because you have filtering enabled on ... UDP and it is blocking return traffic to your computer from your ISP DNS ... The only time you would want to enable UDP filtering for port 53 ... would be if you were running a DNS server. ...
    (microsoft.public.windowsxp.security_admin)