Re: refresh ad

From: jas0n (no_at_email.here)
Date: 12/06/04


Date: Mon, 6 Dec 2004 21:49:23 -0000

In article <95DA4CDD-A532-4943-A72B-07CB2E5E3D1B@microsoft.com>,
AndreiUngureanu@discussions.microsoft.com says...
> To avoid fragmentation Cisco VPN Client will reduce the MTU to 1300 on all
> adapters. I hope this is the key to your problem.
>
> Andrei Ungureanu
> www.eventid.net

it could well be ... one of the first things the folk who look after the
cisco adsl router did was to alter the mtu on it to improve performance
from an adsl line so i was told .... this was before swapping the router
for another known working one.

we have lots of sites they look after all going through the same vpn
concentrator/pix setup and the other sites were not experiencing this
issue ....

i say were not .... i have been informed that 2 other sites are
exhibiting similar issues so for an interim measure i told them to
install the cisco client vpn software until we can identify it - i'll
have to check it solved their issues tomorrow.

so, i guess its a call into the adsl provider in the morning and get
their take on mtu settings for their network considering the adsl which
is theirs terminates on a large leased line pipe which is also theirs
...

should they be the people to dictate the correct mtu or is it a matter
between adsl router and receiving vpn concentrator?



Relevant Pages

  • Re: refresh ad
    ... >> To avoid fragmentation Cisco VPN Client will reduce the MTU to 1300 ... > the cisco adsl router did was to alter the mtu on it to improve ...
    (microsoft.public.win2000.active_directory)
  • Re: Site-to-Site VPN
    ... NetVanta router, cant split them up due to our need for the lines for ... I have static at the main office, not sure about the remote. ... VPN between ASA and NetVanta Situation: The client creates a site to site VPN between Cisco ASA5510 and NetVanta 2054, ...
    (microsoft.public.windows.server.networking)
  • Re: home network problems
    ... Deterministic Network Enhancer is one item installed by Cisco 3000 VPN. ... firewall softwall can be found. ...
    (microsoft.public.windowsxp.network_web)
  • Re: A RAS/VPN "Is it just me?" question
    ... You have a T1 at the office connected to a Cisco ... Then you say you have a Dlink at the office and a Dlink at ... If you are adventurous you could have me try to vpn from one of my ... >> router? ...
    (microsoft.public.windows.server.sbs)
  • Re: L2TP/IPSec Client VPN Kills Passthrough IPSec VPN
    ... Once you added the Cisco Router for the S2S-VPN it *became* the primary LAN ... The Default Gateway of the Cisco box needs to be the ISA, ... the "P" in the VPN means. ... RRAS starts on the ISA server, after setting up the client remote access, ...
    (microsoft.public.isa.vpn)