Re: ad replication and nat

From: Cary Shultz [A.D. MVP] (cwshultz_at_mvps.org)
Date: 09/21/04 

Date: Tue, 21 Sep 2004 13:17:27 -0400

Pretty sure that AD does not work so well over a NAT device. I am pretty
sure that you have already looked at the following article from Microsoft:

http://www.microsoft.com/serviceproviders/columns/config_ipsec_P63623.asp

HTH,

Cary

"stingary" <aresblade@hotmail.com> wrote in message
news:OdJ%23M29nEHA.2096@TK2MSFTNGP15.phx.gbl...
> HI
> Ihave this situation
>
>
> ad server1 10.1.1.2--------------------------10.1.1.1 nat device
> 192.168.0.1-----------------------192.168.0.2
>
>
> does ad replication work? i mean as it is, no ipsec and no vpn just a nat
in
> the middle
> i have founfd docs but they always talk about ipsec and vpn!!!!!!!!!!
>
> how should i configure dns and firewall? (if the nat act also as
firewall?)
>
>
> thanks
>
>

Relevant Pages

  • Re: A good router
    ... I have been using a Linksys BEFW11S4 wireless/wired 4 port switch router ... A recent email from WatchGuard that I got the other day about NAT ... NAT device is a firewall. ... This article debunks the myth that a NAT device ...
    (comp.security.firewalls)
  • Re: VPN not working when client behind another firewall
    ... The latest is that we have tested the ports and GRE ... >place a hardwarebased firewall router out in front of SBS ... This area is NAT-T over IPSec across ... >server to work when behind a NAT. ...
    (microsoft.public.windows.server.sbs)
  • Re: home network behind NAT and firewall ?
    ... >> real Firewall appliance with more than 20 systems at any given time. ... >> firewall provides for the ability to assign both public (not nat) and ... that would reset the router and allow remote control - it was noted ... >> LAN inside their network and it would never have to reach the ISP's ...
    (comp.security.firewalls)
  • Re: NAT vs. True Firewalls
    ... not just mean packet filter. ... A firewall can be made up of one or more ... components that can block or filter protocol traffic between two networks. ... So a NAT can be as much part of a firewall implementation as the ...
    (comp.security.firewalls)
  • Re: router vs. gateway
    ... > I don't see a firewall as a NAT device although it may support NAT ... Never seen one that wasn't a NAT Device. ... A router can be made a NAT Device by enabling NAT and setting ...
    (microsoft.public.win2000.networking)