Re: VS2005 seems SLOOOOOW

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

> Does this sound familiar? http://support.microsoft.com/kb/910832/en-us

No. It doesn't. But I did find one problem.

When I don't have an active internet connection (because my DSL router is
off, network disconnected, whatever), just to run (with or without
debugging) a program from within the IDE takes 30 seconds before I can
actually begin interacting with my application. Meanwhile, I can see it
struggling to establish a connection over the network. Once I get connected
to the Internet, I have no problems waiting my my program to execute. It
builds instantly, just takes time to actually run. Don't know why, because
I am not doing any network communications in the program. In fact, it
happens on a brand new WinForms application.

Tried it on 3 different machines that are not identicle and happens on all
three (complete install of VS 2005 Premium, MSDN for it, and SQL 2k5).


Thanks,
Shawn


.

Relevant Pages

  • Re: Demand-dial Interface and/or new Broadband connection?
    ... NIC that connects to the DSL router ... Ethernet adapter Internet: ... > network so any computer on the 192.168.1.xxx network needs to be configured ... > be an always on connection using DSL. ...
    (microsoft.public.windows.server.networking)
  • Re: Demand-dial Interface and/or new Broadband connection?
    ... Since you have another DSL router, try connecting it directly to the DSL ... password and other configuration for the DSL connection. ... I have heard about some network connectivity issues with SP1. ... > configured this same server in a friend's site. ...
    (microsoft.public.windows.server.networking)
  • Re: RH9 Configuration for DSL
    ... You have a DSL router provided by Ameritech, ... Netgear Router, correct? ... incoming phone line connected to the DSL router, then the network patch ... > network card and the DSL connection. ...
    (linux.redhat)
  • Re: Send mail through separate internet connection
    ... I have a firewall connected to the t1 that does all my NAT and is ... external address of the dsl router. ... dsl connection out for mail would fix that problem a 2nd mx record ... I don't have a full picture of your network ...
    (comp.dcom.sys.cisco)
  • Re: computer is visible in My Network, but not accessible.
    ... Network, but not accessible."The Network Path Was Not Found" This PC ... conneced to DSL modem/router. ... This DSL router have two output LAN ... connection was from ISP router connected to hub, all PCs still have local IP ...
    (microsoft.public.windowsxp.general)