Re: How I fixed my Vista Print Spooler Problems
- From: Anddy <Anddy.3yvok1@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 21 Sep 2009 20:04:41 +0100
:p Hi folks, hello to you all . I have had print spool problems on my
packard bell ixtreme x6618 vista 64bit. It started with my printer
about a week ago i had a Lexmark P6350 all in one then it stopped
working, the error came up print spool error. I tried different things
to fix the problem thinking it was the drivers i uninstalled them and
then installed the most up to date one. No use i thought the printer
had snuffed it. I ordered a new Lexmark X5075 all in one arrived today
and it worked for two pages then the same error came up so i clicked
control panel and looked at printer it also stated that there was
another printer called: Microsoft xps Document Writer. I took a chance
and deleted this off as i do not use it and hey presto my new printer
works perfectly. I have tried printing from different sites ,and off the
internet and all print great now, office 2007, emails, also work ok. I
do not have a lot of knowledge about computers but if this helps
somebody out. It worked for me. P.S. I did not see this : Microsoft xps
document writer : in my printers before it must have been in something
that i downloaded or was updated about a week ago. Have a nice day.
Anddy.
perrylea@xxxxxxxxxxxx;1044653 Wrote:
I have been a long time user of Windows XP SP2. I had recently
putchased Vista Ultimate with the intent to upgrade my XP system.
The principal problem was all attempts to add a printer resulted in
errors stemming from the Print Spooler Service.
Before I begin let me preface my environment:
Intel 2.8 GHz machine with 2 GB RAM and ATI 1300 video. XP SP2 as I
mentioned.
I have used over the years the following imaging devices:
a. HP Color LaserJet 4650
b. HP 8150 AIO Injet/Scanner/Fax
c. HP 9100 Digital sender
I should note that the digital sender has long since been removed.
The 8150 is seldom used. Both of these devices had left a long
residue of drivers and services on my XP box. The Laserjet only used
a PCL6 driver.
------ The Vista Experience ---------
Now begins my 14 hours of debug joy. The Vista install went fairly
smoothly. The Windows Compatibility check noted some issues with
Symmantec AntiVirus, ATI veido, Sigmatel Audio, Windows MGR 5.1, and
the Common Client. Nothing seemed out of hte ordinary so I went
with an upgrade install of Vista Ultimate.
The installation took about 3 hours.
When complete I verified that video, networking, my critical
applications, and device worked. Most did, except for the DVD drive.
There is a BLOG dedicated to that issue.
The main problem was trying to add a printer.
All attempts to add a printer resulted in a pop up showing:
"windows can't open add printer. the local print spooler is not
running"
If I manually restarted the Print Spooler service and quickly add a
printer in the Control Panel dialogue I got a different error:
"0x000006be error"
So began the Google searches for help.
1. I attempted to restart the spooler services as noted on many blogs:
'Problem installing Lexmark x4650 - error 0x000006be, Print Spooler,
Add Printer - Vista Forums' (http://tinyurl.com/nbsh79)
1. I attempted to manually clean all my drivers and registry changes
as noted here:
'Bruce's Printing Pages'
(http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm)
This did not help
2. I traversed HP's site and found this tidbit:
'HP Printing Products - 'Error 1068 - Print Spooler Error' Message
Displays in Windows Vista when Installing or Uninstalling HP Software -
HP Customer Care (United States - English)' (http://tinyurl.com/623p5c)
No luck yet.
3. I traversed MS support and found this KB:
'You cannot add a printer and you receive printer spooler error
messages in Windows XP' (http://support.microsoft.com/kb/324757)
I did go to C:/windows/system32/spool/
I deleted all drivers - residue from the XP builds.
The PRINTERS directory was empty (obviously no prointers were every
installed)
I deleted all printprocs.
Many blogs indicated this successfully worked for different users.
However, this did not resolve the problem.
4. I reinstalled Vista
No luck there either
5. I tried installing a Vista CD installation of the Laserjet 4700
thinking a full Cd isntall might work :
No luck
6. I tried downloading the PrintFlush-1.3 utility to clean the Spooler
settings and queues.
No luck
7. I downloaded the Print Spooler Fix wizard. While this didn't work
it did clue me into some registry settings that were dangling. I
deleted them.
Still no luck
8. Finally I went to C:/windows/system32 and added columns to the
directory listing to indicate company names. I deleted all HP drivers
I could find. I have to say the HP AIO 8150 left a shotgun of driver
residue.
----------------------------------------- The fix
--------------------------------
Now begins some deeper debugging and resolution.
As you see I have stripped my registry settings, drivers, monitors,
and whatnot. You can assume I have no print drivers at this point.
1. I went to Device Manager and reviewed the logs. Under Event Views -
Windows Logs -> Application. I noticed failures related to thespooler as:
"The print spooler cannot start because the PrinterBusEnumerator could
not start. Error code 0x80070006. This can occur because of system
instability or a lack of system resources."
2. I searched Google and found a relationship between
PrinterBusEnumerator and the UMBus (User Mode Bus).
3. I went to Device Manager again and clicked on View -> Show Hidden
Devices. Selected System Devices. And Uninstalled both the UMBus
Enumerator as well as teh UMBus Root Bus Enumerator.
4. Rebooted.
5. Went to Control Panel. Selected Add Hardware.
6. Selected Install the Hardware Manually.
7. Clicked on the first selection: "Show All Devices"
8. Added back bot the Microsoft UMBus Enumerator and the UMBus Root
Bus Enumerator.
9. Rebooted.
10. Went to add printer. And could then add back my Color Laserjet
4600.
11. Printed a test page and application document as a test.
Hope that might help someone in the future.
--
Anddy
Posted via http://www.vistaheads.com
.
- Prev by Date: Re: Can ping printer but can't print
- Next by Date: HP DESKJET 710C
- Previous by thread: Can ping printer but can't print
- Next by thread: HP DESKJET 710C
- Index(es):
Relevant Pages
|
