Re: IBM 4019 Laser printer

Tech-Archive recommends: Speed Up your PC by fixing your registry

I know old school is good sometimes but you will need to get a new parallel
card. ISA is pretty much gone.

Expansion Slots
PCI: 1 Slot
PCIe x1: 2 Slots
Back: line-in, line-out, microphone, rear surround, side surround


--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no rights.

"LVTravel" <noone@xxxxxxxxxxx> wrote in message
news:OEePip%23NJHA.1164@xxxxxxxxxxxxxxxxxxxxxxx
You will possibly also need a Vista driver for the parallel port card.
While I haven't installed a Parallel port card in Vista, I have in XP and
needed a driver from the card's manufacturer.

Go to the card manufacturer's web site and see if one is available. (If
you don't find one for Vista, see if one is available for XP. That will
indicate whether a driver may be needed and if there isn't one for Vista,
the card may not be supported.)


"Robert" <Robert@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:1B5F7D81-459E-4FD7-90AA-8660624F596A@xxxxxxxxxxxxxxxx
I have a 16-bit ISA dual parallel port card. I have a Dell Inspiron 518
computer with a Core-2 processor that I purchased recently and plan to
connect to the printer. I haven't looked inside the computer yet to see
if it
can accomodate the card.
Thanks for the Vista driver info.
Robert

"Alan Morris [MSFT]" wrote:

this should. The driver is included in Vista.

What kind of machine do you have that can accept a parallel card but
does
not have a parallel port already?

If you already have a parallel port and are adding another port so you
can
access multiple devices, stick to a basic card that just has the one
port.

The spooler will only access LPT1, LPT2, and LPT3.



--
Alan Morris
Windows Printing Team
Search the Microsoft Knowledge Base here:
http://support.microsoft.com/search/?adv=1

This posting is provided "AS IS" with no warranties, and confers no
rights.

"Robert" <Robert@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:5969A7DA-7EDC-4258-AFDD-2CFA1F3FB186@xxxxxxxxxxxxxxxx
Can this printer operate with a parallel printer card in a Windows
Vista
Home
Premium PC?









.

Relevant Pages

  • Re: IBM 4019 Laser printer
    ... You will possibly also need a Vista driver for the parallel port card. ...
    (microsoft.public.windows.vista.print_fax_scan)
  • Re: IBM 4019 Laser printer
    ... I purchased a PCI Express parallel port card ... PCI: 1 Slot ... Windows Printing Team ... While I haven't installed a Parallel port card in Vista, ...
    (microsoft.public.windows.vista.print_fax_scan)
  • Re: [PATCH] Netmos parallel/serial/combo support
    ... my 9835 card now works when loading 8250_pci ... parport_pc finds one parallel port -- on this netmos ... serial ports it detected previously: ...
    (Linux-Kernel)
  • aditional parallel port problems
    ... circuit that works with the orders of a parallel port ... With this orders, the circuit turn on/off ... a PCI Multio I/O card with NM9835CV chip. ... some devices turn on and other turn off. ...
    (Linux-Kernel)
  • SOLVED_aditional parallel port problems
    ... The solution was that the parallel port of the card ... ports and they both have a ground pin. ... With this orders, the circuit turn on/off ...
    (Linux-Kernel)