Re: vista unresponsive at startup - lanmanserver

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: sprakties <guest@xxxxxxxxxxxxxxxxx>
Date: Sun, 1 Mar 2009 11:03:41 -0600

Drew, I have the same problem. I think I have it narrowed down to my
external harddrives (WD 1 Terabyte). Once I unplug them, my computer
boots right up. When they are plugged in, takes a few minutes to boot
and I get the lanman server hang message. Sparky

--
sprakties
.

Prev by Date: Re: BSOD error- registry file failure
Next by Date: Errors
Previous by thread: BSOD error- registry file failure
Next by thread: Re: vista unresponsive at startup - lanmanserver
Index(es):
- Date
- Thread

Relevant Pages

Re: 5 flashes Ultimate MPU resets - J1 removed game boots
... this helped out our troubleshooting at all (this is on the MPU board).. ... I've done that before in the troubleshooting method (when I unplug ... right connectors on the lamp driver, it boots fine. ...
(rec.games.pinball)
Re: 5 flashes Ultimate MPU resets - J1 removed game boots
... this helped out our troubleshooting at all (this is on the MPU board). ... I've done that before in the troubleshooting method (when I unplug ... connector J1 from the MPU ) it boots fine, ... right connectors on the lamp driver, it boots fine. ...
(rec.games.pinball)
Odd problem on a Vaxstation 4000-60
... and then boots all over again normally. ... If I unplug the ethernet cable, ... opposite end from the hub. ... On the machine end of the cable is a Synoptics 508A transciever. ...
(comp.sys.dec)
Re: Cant get my Mirror drive G4 to boot up from a second hard drive with OS9.2 on it.
... start-up disc - and it registers as having a viable OS on it - the G4 ... still boots into OSX. ... Unplug the OSX drive. ...
(comp.sys.mac.misc)