Re: DVD+/-RW device failed to start (Code10)
- From: "meerkat" <waiting@xxxxxxxxxxxxxxxx>
- Date: Fri, 30 Jan 2009 20:36:07 -0000
"Patty" <patty@xxxxxxxxxxxxx> wrote in message
news:DF785ED7-0BAB-46D7-98FA-032DBE244FF7@xxxxxxxxxxxxxxxx
All of a sudden my DVD drive fails to be seen by Windows Vista HomeHi Patty
Premium
32-bit. It won't show up as a drive in My Computer. Under Device
Manager
it shows up as a Pioneer DVR-111D (the old one). In case the drive
was bad
I replaced it with a Pioneer model 1910LS which shows up in BIOS and
Device
Manager as a DVR-113NP. But I still get the yellow exclamation mark
on the
DVR-113NP under DVD/CD-Rom drives in Device Manager.
This all happened sometime after installing the Windows Update:
Microsoft - Other hardware - HID Non-User Input Data Filter
Installation date: ?1/?17/?2009 11:46 PM
Installation status: Successful
Update type: Optional
Microsoft Other hardware software update released in November, 2008
More information:
http://winqual.microsoft.com/support/?driverid=20230616
Help and Support:
http://support.microsoft.com/select/?target=hub
I can no longer access my DVD and think it may be related to this
Update or
something else in Windows Vista Home Premium 32-bit. The device gets
power
and is recognized by BIOS and Windows, but the device Fails to Start
(Code
10). If anyone has any ideas I would be grateful.
Go here, and d/load driver detective
http://driver-pro.com/related/english/hardware-drivers/?gclid=CM2F0L-Rt5gCFZCD3godL0Q1YQ&hit=1&adurl=12252
Try for an updated driver for your unit.
Remember wherever possible, you must
`run as Administrator`.
--
bw..
.
- References:
- DVD+/-RW device failed to start (Code10)
- From: Patty
- DVD+/-RW device failed to start (Code10)
- Prev by Date: DVD+/-RW device failed to start (Code10)
- Next by Date: Vista many non-responding processes
- Previous by thread: DVD+/-RW device failed to start (Code10)
- Next by thread: Vista many non-responding processes
- Index(es):
Relevant Pages
|
