Re: Where is WEP/WPA/WPA2 status shown?

Tech-Archive recommends: Fix windows errors by optimizing your registry

Thanks, that helped. The fallback I was speaking of was when the router is set on WPA2 Mixed, which does support WPA or WPA2. And from what I've seen, if the client's on WPA2, and for whatever reason that doesn't work (such as a driver issue or buggy hardware), it will negotiate WPA.

Do you happen to know if there's anything built-in to Vista that shows your authentication and encryption for the current Wi-Fi connection? Something like this, from Intel. Ironically, I do have an Intel card, but Intel's PROset software for Vista is barebones and doesn't include such niceties.
http://www.intel.com/support/wireless/wlan/sb/CS-025744.htm

I know Vista shows such detail for VPN connections, but oddly, not for Wi-Fi.

I'd also settle for a third-party app that shows it, but if one exists I've haven't found it yet.

"Jack (MVP-Networking)." <jack@xxxxxxxxxxxxxxxxxxx> wrote in message news:#Ewk57RSJHA.1484@xxxxxxxxxxxxxxxxxxxxxxx
Hi
Wireless encryption does not work this way.
If the Router is set to WPA2 all computers that connect Wireless would use WPA2 there is No fall back.
From the weakest to the strongest, Wireless security capacity is.
No Security
MAC______(Band Aid if nothing else is available).
WEP64____(Easy, to "Break" by knowledgeable people).
WEP128___(A little Harder, but "Hackable" too).
WPA-PSK__(Very Hard to Break).
WPA-AES__(Not functionally Breakable)
WPA2____ (Not functionally Breakable).
Note 1: WPA-AES the the current entry level rendition of WPA2.
Note 2: If you use WinXP and did not updated it you would have to download the WPA2 patch from Microsoft. http://support.microsoft.com/kb/893357
The documentation of your Wireless devices (Wireless Router, and Wireless Computer's Card) should state the type of security that is available with your Wireless hardware.
All devices MUST be set to the same security level using the same pass phrase.
Therefore the security must be set according what ever is the best possible of one of the Wireless devices.
I.e. even if most of your system might be capable to be configured to the max. with WPA2, but one device is only capable to be configured to max . of WEP, to whole system must be configured to WEP.
If you need more good security and one device (like a Wireless card that can do WEP only) is holding better security for the whole Network, replace the device with a better one.
The Core differences between WEP, WPA, and WPA2 - http://www.ezlan.net/wpa_wep.html
Jack (MVP-Networking).

"Milhouse Van Houten" <btvs@xxxxxxxxxxxxx> wrote in message news:eniLIEHSJHA.1148@xxxxxxxxxxxxxxxxxxxxxxx
In my Vista SP1, I can't seem to find where it shows how my current wireless connection is, well, connected. I expected to see it in the status of the connection in Details, but it wasn't there. Yes, in the network properties of the wireless NIC I can see how it's set, but I don't think that's necessarily how it ultimately connected. For example, if the router is on WPA2 Mixed, it would accept either a WPA or WPA2 connection, and if for whatever reason WPA2 couldn't be established, I think it would fall back to WPA.

.

Relevant Pages

  • Re: O/T - Stealing Broadband
    ... I use WPA2 security and if I connect to speedtest.net I get 20Mbps downstream and 10ms latency. ... Wireless laptop speed is identical to wired desktop speed. ... With a clear line of sight, a Pringles can antenna will carry high speed wifi over ten miles...and their are far more professional antennas available than those. ...
    (uk.media.tv.misc)
  • Re: Whats the current "best" way to secure a wireless network?
    ... unless I'm misinterpreting something...I think WPA2 can now be ... my wireless network is to use WPA2. ... all the other security ... a hard wired network) is to is to set up a VPN or use IPSec between ...
    (alt.internet.wireless)
  • Re: Triple DES vs WPA, WPA2 and WPA PSK?
    ... From the weakest to the strongest, Wireless security capacity is. ... WPA-AES the the current entry level rendition of WPA2. ... WEP, to whole system must be configured to WEP. ...
    (microsoft.public.windowsxp.network_web)
  • Re: Wifi Security
    ... Well, if you want to try to break the security just as an exercise, have fun. ... to a person's network happens right from that person's own computer by their ... I have changed the security to WPA2 with a 128bit ... and attempt to break into her wireless internet connection. ...
    (microsoft.public.security)
  • Re: Wifi Security
    ... Then add in good practices and secure those endpoints! ... I have changed the security to WPA2 with a 128bit ... and attempt to break into her wireless internet connection. ... part of her network cannot do WPA2 but you actually want her network to ...
    (microsoft.public.security)