Re: Ethernet Multiple Networks detected, Local access only, Only one exists




Excellent. Apparently I wan't typing in the right keywords to find this
fix or something.

Checked route table, as you can see below, had 0.0.0.0

Solution was to type route delete 0.0.0.0, in command prompt.

Restarted with instant full connectivity.

Thank you for resolution.

Grant Hayman
'OVAL EcoTech Advanced Interstellar Space Propulsion Systems'
(http://www.ovaltech.ca)


route table before fix. type route print in command prompt

C:\Users\Umbriel>route print
===========================================================================
Interface List
10 ...00 1e 68 5e 5c 2a ...... NVIDIA nForce Networking Controller
11 ...00 21 00 13 40 4c ...... Broadcom 4321AG 802.11a/b/g/draft-n
Wi-Fi Adapte
r
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0
isatap.{0D38C49B-2994-401D-ADF7-EBBA0368CAF5}
14 ...00 00 00 00 00 00 00 e0
isatap.{E92D6CE0-2A06-45D6-B441-94B8E88537F0}
12 ...02 00 54 55 4e 01 ...... Teredo Tunneling Pseudo-Interface
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface
Metric
0.0.0.0 0.0.0.0 10.103.35.65 10.103.35.69
30
10.103.35.64 255.255.255.192 On-link 10.103.35.69
286
10.103.35.69 255.255.255.255 On-link 10.103.35.69
286
10.103.35.127 255.255.255.255 On-link 10.103.35.69
286
127.0.0.0 255.0.0.0 On-link 127.0.0.1
306
127.0.0.1 255.255.255.255 On-link 127.0.0.1
306
127.255.255.255 255.255.255.255 On-link 127.0.0.1
306
224.0.0.0 240.0.0.0 On-link 127.0.0.1
306
224.0.0.0 240.0.0.0 On-link 10.103.35.69
286
255.255.255.255 255.255.255.255 On-link 127.0.0.1
306
255.255.255.255 255.255.255.255 On-link 10.103.35.69
286
===========================================================================
Persistent Routes:
None
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
12 18 ::/0 On-link
1 306 ::1/128 On-link
12 18 2001::/32 On-link
12 266 2001:0:4137:9e50:2ca0:3f7e:f598:dcba/128
On-link
11 286 fe80::/64 On-link
12 266 fe80::/64 On-link
12 266 fe80::2ca0:3f7e:f598:dcba/128
On-link
11 286 fe80::3893:32b0:c601:9c46/128
On-link
1 306 ff00::/8 On-link
12 266 ff00::/8 On-link
11 286 ff00::/8 On-link
===========================================================================
Persistent Routes:
None


--
ghayman
.



Relevant Pages

  • Re: IPv6 route mutex recursion (crash) and fix
    ... FreeBSD, this can happen with the route which has the RTF_PRCLONING ... But removing the check may be too radical and may have unexpected ... fix to the problem. ...
    (freebsd-net)
  • Re: DUAT
    ... > I thought that for /G there still needed to be a vor or other nav fix ... > destination and then add a vor in the middle that doesn't increase the ... route, that will also help ATC visualize the route. ... the destination coordinates as an intermediate fix. ...
    (rec.aviation.ifr)
  • Re: Dawlish main line washed away.
    ... This account not read, substitute trains for rail. ... It's still going to take years, so it's no quick fix. ... exact route would take months, and designing it will take at least a few ... So the inhabitants of Plymouth and Cornwall need the Dawlish route to be ...
    (uk.railway)
  • Re: Garmin GPSmap 76CS unit hangs on Route Page when "Working" on Recalculate
    ... >>I phoned Garmin today to ask them how to fix this, ... > Best Route and check whether that works better. ... Getting back to my original posting, I thought V3.50 of the firmware ...
    (sci.geo.satellite-nav)
  • Re: Default route dissapears constantly
    ... John Straiton wrote: ... >the machine will come up but quickly it will lose it's default route. ... >I don't mind researching possible means to fix it, ... into a patch and the source tree. ...
    (freebsd-questions)