Re: No Sharing Tap in the Connection Properties



On Jun 7, 9:34 pm, "Robert L. \(MS-MVP\)" <findem...@xxxxxxxxxxxxxxx>
wrote:
Can you change the LAN IP to 192.168.0.1? or this search result may help.
Vista ICS Issues
      Vista ICS Issue. How to: disable ICS public connection in Vista · How
to: Enabling ICS on Vista · ICS between Windows Vista and Windows XP ...
     www.chicagotech.net/vista/vistaics.htm

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting onhttp://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access onhttp://www.HowToNetworking.com"buisa"; <bu...@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message

news:E7571FA2-D913-48E6-8CB4-A6A1A8B8E16F@xxxxxxxxxxxxxxxx



Thanx, Robert L.  the details as follow:

c:\ipconfig/all

Windows IP Configuration

  Host Name . . . . . . . . . . . . : HomePC
  Primary Dns Suffix  . . . . . . . :
  Node Type . . . . . . . . . . . . : Hybrid
  IP Routing Enabled. . . . . . . . : Yes
  WINS Proxy Enabled. . . . . . . . : No

PPP adapter Dial-up Connection 2:

  Connection-specific DNS Suffix  . :
  Description . . . . . . . . . . . : Dial-up Connection 2
  Physical Address. . . . . . . . . :
  DHCP Enabled. . . . . . . . . . . : No
  Autoconfiguration Enabled . . . . : Yes
  IPv4 Address. . . . . . . . . . . : 82.194.52.62(Preferred)
  Subnet Mask . . . . . . . . . . . : 255.255.255.255
  Default Gateway . . . . . . . . . : 0.0.0.0
  DNS Servers . . . . . . . . . . . : 217.17.233.49
                                      193.188.97.193
  NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

  Connection-specific DNS Suffix  . :
  Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit
Ether
net Controller
  Physical Address. . . . . . . . . : 00-19-21-E4-C7-C8
  DHCP Enabled. . . . . . . . . . . : No
  Autoconfiguration Enabled . . . . : Yes
  Link-local IPv6 Address . . . . . :
fe80::5937:5c2f:8278:e601%8(Preferred)
  IPv4 Address. . . . . . . . . . . : 192.168.1.80(Preferred)
  Subnet Mask . . . . . . . . . . . : 255.255.255.0
  Default Gateway . . . . . . . . . :
  DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                      fec0:0:0:ffff::2%1
                                      fec0:0:0:ffff::3%1
  NetBIOS over Tcpip. . . . . . . . : Enabled

Tunnel adapter Local Area Connection* 51:

  Connection-specific DNS Suffix  . :
  Description . . . . . . . . . . . : Microsoft 6to4 Adapter #24
  Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
  DHCP Enabled. . . . . . . . . . . : No
  Autoconfiguration Enabled . . . . : Yes
  IPv6 Address. . . . . . . . . . . : 2002:52c2:343e::52c2:343e(Preferred)
  Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
  DNS Servers . . . . . . . . . . . : 217.17.233.49
                                      193.188.97.193
  NetBIOS over Tcpip. . . . . . . . : Disabled

THE ROUTING TABLE may help as well:

IPv4 Route Table
========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Met
         0.0.0.0          0.0.0.0         On-link      82.194.52.62
    82.194.52.62  255.255.255.255         On-link      82.194.52.62
       127.0.0.0        255.0.0.0         On-link         127.0.0.1   4
       127.0.0.1  255.255.255.255         On-link         127.0.0.1   4
 127.255.255.255  255.255.255.255         On-link         127.0.0.1   4
     192.168.1.0    255.255.255.0         On-link      192.168.1.80   4
    192.168.1.80  255.255.255.255         On-link      192.168.1.80   4
   192.168.1.255  255.255.255.255         On-link      192.168.1.80   4
       224.0.0.0        240.0.0.0         On-link         127.0.0.1   4
       224.0.0.0        240.0.0.0         On-link      192.168.1.80   4
       224.0.0.0        240.0.0.0         On-link      82.194.52.62
 255.255.255.255  255.255.255.255         On-link         127.0.0.1   4
 255.255.255.255  255.255.255.255         On-link      192.168.1.80   4
 255.255.255.255  255.255.255.255         On-link      82.194.52.62
========================================================================
Persistent Routes:
 None

IPv6 Route Table
========================================================================
Active Routes:
If Metric Network Destination      Gateway
89   1150 ::/0                     2002:c058:6301::c058:6301
 1    306 ::1/128                  On-link
89   1050 2002::/16                On-link
89    306 2002:52c2:343e::52c2:343e/128
                                   On-link
 8    276 fe80::/64                On-link
 8    276 fe80::5937:5c2f:8278:e601/128
                                   On-link
 1    306 ff00::/8                 On-link
 8    276 ff00::/8                 On-link
========================================================================
Persistent Routes:
 None

"Robert L. (MS-MVP)" wrote:

Posting the result of ipconfig /all may help.

--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"buisa" <bu...@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:6658B3E8-ED36-4232-904E-D413BFCC9DB9@xxxxxxxxxxxxxxxx
I'm connecting two PCs one of which is connected to the inet through a
USB
ADSL modem and both are connected through an Ethernet switch, the
properties
of the LAN Card connection on the first PC (which is running Windows
Vista)
has No Sharing Tap for sharing the internet to apply ICS (Internet
Connection
Sharing). Any solution guys.- Hide quoted text -

- Show quoted text -

I'll start off with I'm not familiar with ADSL. Having said that,
shouldn't there be a default gateway and subnet mask?

The dialup default gateway is 0.0.0.0 and the subnet mask is
255.255.255.255, and although the ethernet has a IPv4 address
populated, the default gateway is blank, and has a subnet mask of
255.255.255.0.

Also, shouldn't the IP of the router show up on the default gateway
line? Wouldn't doing a tracert command help? Or can you not connect to
anything? For the ethernet connection, try start/run/cmd, <enter>, at
the command prompt type in: tracert www.google.com, and see what
appears. The first IP should be your router, after that, the other
routers until it gets to google.com. If you are on a switch, it may go
through one or more routers before it leaves the building.

--Jim
.



Relevant Pages

  • Re: renew IP fails after system restore
    ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ... this stopped broken icon on network connection and it ... says connected but there is no access to the internet. ...
    (microsoft.public.windowsxp.network_web)
  • Re: WindowsServer 2003 has stopped taking connections from outside
    ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ... our LAN can connect to the server. ...
    (microsoft.public.windows.server.general)
  • Re: Hardwire remote desktop access through router?
    ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ... the router and to the internet without the ethernet cable. ...
    (microsoft.public.windows.vista.networking_sharing)
  • Re: RDP is not connecting
    ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ... Network card is built into motherboard so I have not replace that. ...
    (microsoft.public.windowsxp.work_remotely)
  • Re: Connection status: unknown, Server execution failed FIX!
    ... Networking, Internet, Routing, VPN Troubleshooting on ... How to Setup Windows, Network, VPN & Remote Access on ... For all of the people that can still connect to the internet, ...
    (microsoft.public.windows.vista.networking_sharing)