Re: setting subnet mask and gateway

From: Oriental Indian <guest@xxxxxxxxxxxxxxxxx>
Date: Thu, 5 Jun 2008 04:39:09 -0500

Did u get a solution to the problem?
I can still not get subnet mask and the gateway in the properties input
screen.
Someone help!

--
Oriental Indian
.

Prev by Date: RE: Strange problem networking two vista boxes 32 bit and 64 bit
Next by Date: Re: help with internet access
Previous by thread: help with internet access
Next by thread: Re: Problem with Remote Desktop
Index(es):
- Date
- Thread

Relevant Pages

Re: TCPIP Profile (GATEWAY vs BEGIN/ENDROUTES)
... GATEWAY is the old, old way of doing it, the understanding of which was some ... Thus the network is 10, ... says and 1500 is good for one of the Ethernet flavours, Subnet Mask is ... TCPIP Profile ...
(bit.listserv.ibm-main)
Re: connecting a device that supports IP address, but not subnet mask or gateway to a network with m
... default gateway. ... Cisco network without an option to configure a subnet mask and default ... tested on) under interface configuration mode. ...
(comp.dcom.sys.cisco)
Re: W2k to W98 nnetwork not working
... Notice that there is no default gateway for the Win2K machine. ... TCPIP configuration for this network adapter. ... If you simply get the gateway addresses for both systems and subnet mask on ...
(microsoft.public.win2000.networking)
Re: connecting a device that supports IP address, but not subnet mask or gateway to a network with m
... default gateway. ... Cisco network without an option to configure a subnet mask and default ... tested on) under interface configuration mode. ...
(comp.dcom.sys.cisco)
Re: Wired and wireless file sharing between XP and Leopard (PC and
... My Default Gateway is 192.168.2.1 ... Her Subnet mask is 255.255.255.0 ... Based on what you are telling me, it sounds as if the desktop PC and the MAC ... "John B" wrote: ...
(microsoft.public.windowsxp.network_web)