Re: Vista x64 install SATA/AHCI signed driver problem
- From: andy <bogusaddress@xxxxxxxxxxxxxxxx>
- Date: Thu, 05 Mar 2009 09:10:04 -0800
What motherboard do you have?
On Wed, 4 Mar 2009 19:16:40 -0600, li Arc <guest@xxxxxxxxxxxxxxxxx>
wrote:
Hi guys,
I'm having problems trying to install Vista x64 Ultimate on my G33
Express machine, which utilizes the ICH9 controller for the SATA/AHCI
capabilities. I've got a single WD Raptor 74GB connected to port 1, and
am trying to install Vista x64 in either SATA or AHCI modes.
Scenario 1: SATA x64
When I attempt to install x64, it will notify me that no drives are
found. I opt to load drivers, and try to provide Intel's Matrix Storage
Manager v8.7.0.1007 files, v7.8, or even the x64-floppy, but they don't
seem to provide SATA drivers for x64.
Scenario 2: AHCI x64
When I try to set BIOS to AHCI mode instead and restart the Vista
install process, this time I'm confronted by a message that indicates
that unsigned drivers are not supported in x64 and kicks me out.
Scenario 3: SATA x32
When I try x32 install instead, Vista still doesn't find any compatible
Intel drivers, and no drives are found.
Scenario 4: AHCI x32
Vista will accept the SATA driver provided by Intel, but still no
drives are found. The Raptor does not have any problems being detected
in BIOS.
Starting to run out of ideas...any help would be appreciated, thanks!
li Arc
.
- References:
- Vista x64 install SATA/AHCI signed driver problem
- From: li Arc
- Vista x64 install SATA/AHCI signed driver problem
- Prev by Date: Re: Analysing the license key
- Next by Date: Re: Problem Installing Vista to a New Harddrive
- Previous by thread: Vista x64 install SATA/AHCI signed driver problem
- Next by thread: Verify Windows Vista
- Index(es):
Relevant Pages
|
