Re: Mission Impossible? Dual Boot XP and Vista?
- From: "GrahamH" <graham@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 19 Aug 2008 16:12:52 +0100
Ok RC,
I see what your doing, (complicated setup!!!) my pc before (not so complicated!!!) had XP installed on 1 primary and an extended partiton with several logical drives to support further XP installs in multiboot config.
The only problem is, if the primary boot info gets corrupt you lose access to everthing on the extended partitions so unable to boot into any o/s. Also any partiton changes made cause windows to rescan and reset drive letters.
If you have an o/s installed on a seperate primary then it is independant and isolated from the others, making it a bit safer and each primary will be a `C` drive .
The only trouble is the limit on partitions for one drive which is i guess important if you need a large number of different o\s`s. Hence the need to install on logicals.
Good luck.
Graham....
Hi, Graham.
Why not use one drive and create primary partitions for each o/s and use a suitable boot manager.
Win2K/XP/Vista will install on a logical drive in an extended partition just fine. Only the System Volume (the one used to boot the computer) must be a primary partition, set Active. (For lurkers, see KB 314470, Definitions for system volume and boot volume, http://support.microsoft.com/kb/314470/EN-US/ - they are NOT what most users think!)
For years, I've formatted each HD with a single small primary partition, followed by an extended partition divided into several logical drives. I install ONLY the start-up files (NTLDR, etc., for WinXP and bootmgr, etc., for Vista - and the appropriate boot sector, of course) into the primary partition. And I run Setup multiple times, once with each HD designated in the BIOS as the boot device, so that I can boot from Disk 2 if Disk 0 is unplugged or broken. All the rest of each OS goes into one of the logical drives. I have to edit Boot.ini for WinXP or run bcdedit.exe (or VistaBootPro) to be sure that each System Volume points to the correct Win/Vista installation.
Actually, I've almost stopped dual-booting and run Vista Ultimate x64 almost exclusively these days. But I do have one HD with the WinXP boot sector; when I want to boot into WinXP, I set the BIOS to boot from that HD. I've not tried hot-swapping my SATA drives, and I've never used dynamic volumes.
I've now transitioned to all SATA HDs (2 single and 2 as a RAID 1 mirror). There were many trials and tribulations when I was mixing IDE with SCSI and then with SATA HDs, especially with earlier motherboards that insisted on always booting from IDE! :>(
RC
--
R. C. White, CPA
San Marcos, TX
rc@xxxxxxxxxxxxx
Microsoft Windows MVP
(Running Windows Live Mail 2008 in Vista Ultimate x64 SP1)
.
- Follow-Ups:
- Re: Mission Impossible? Dual Boot XP and Vista?
- From: R. C. White
- Re: Mission Impossible? Dual Boot XP and Vista?
- From: Timothy Daniels
- Re: Mission Impossible? Dual Boot XP and Vista?
- References:
- Mission Impossible? Dual Boot XP and Vista?
- From: Optimus
- Re: Mission Impossible? Dual Boot XP and Vista?
- From: GrahamH
- Re: Mission Impossible? Dual Boot XP and Vista?
- From: R. C. White
- Mission Impossible? Dual Boot XP and Vista?
- Prev by Date: Re: HD Light Continually Lights Up
- Next by Date: What is "Msdia80.dll" doing in the root of my storage disks?
- Previous by thread: Re: Mission Impossible? Dual Boot XP and Vista?
- Next by thread: Re: Mission Impossible? Dual Boot XP and Vista?
- Index(es):
Relevant Pages
|
Loading