Re: Change floppy drive assignment from B: to A:
- From: "R. C. White" <rc@xxxxxxxxxxxxx>
- Date: Thu, 28 May 2009 12:22:44 -0500
Hi, M.
As I recall, we always had to swap the FDD ribbon cable to change the floppy drive letters.
My current (15 years old!) floppy drive is a combination unit with both 3.5" and 5.25" drives in a half-height (remember that term?) case with only a single cable for both drives. But in the olden days we had to use two cables or a single cable with two physical connectors, usually split with a few wires twisted between the first and second connectors. If you can't remember - or can't find a reference - post back and we'll find what you need.
Since the letter B: was practically never used, I've assigned it to one of my USB flash drives and use it for B:\Backup of some of my data weekly. I can use Disk Management to change that letter, but Disk Management doesn't work for floppy drives. They are hard-wired.
RC
--
R. C. White, CPA
San Marcos, TX
rc@xxxxxxxxxxxxx
Microsoft Windows MVP
Windows Live Mail 2009 (14.0.8064.0206) in Win7 Ultimate x64 RC 7100
"M Skabialka" <mskabialka@xxxxxxxxxxxxx> wrote in message news:uaYTcU73JHA.1512@xxxxxxxxxxxxxxxxxxxxxxx
I built myself a computer a couple of years ago and have Vista Ultimate on it. Recently I went to create a floppy disk for maintenance on another computer and found that the floppy drive (which I haven't used before) is labeled as the B drive. How do I change that back to A? Right now I am using
subst a: "b:"
which works for now but would rather set it permanently.
.
- References:
- Change floppy drive assignment from B: to A:
- From: M Skabialka
- Change floppy drive assignment from B: to A:
- Prev by Date: Re: External USB drive not recognized by Vista
- Next by Date: Re: Unable to install modem driver in vista
- Previous by thread: Change floppy drive assignment from B: to A:
- Next by thread: RE: Change floppy drive assignment from B: to A:
- Index(es):
Relevant Pages
|
Loading