Re: HDD last sector uneadable under Vista... readable under Linux

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Aramys wrote:

Hello,

I use a 160 Gb Seagate Momentus 7200.2 SATA HDD (ST9160823AS) in my Asus
F3Sa notebook and I have the following problem :

For security reasons, the encryption software I want to use check if the
last sector of my HDD is readable before installing. As it says there is
a problem, I wanted to check by myself using the following command :

dd if=[harddrive] of=[output file] bs=512 count=1 skip=[total guaranteed
sectors - 1]

Under Vista (see dd for Windows on Wikipedia), it returns an empty file,
meaning that the last sector is unreadable.

Under Linux, the very same command returns data without any problem. The
last sector is perfectly readable.

Thinking to a driver problem, I wrote to Intel (ICH8M chip) and they
replied "We understand your concern but the problem you described is
directly related to the motherboard or hard drive manufacturer, not
chipset software". Very strange as the problem does not exist under
Linux with the same hardware.

I wrote to Asus and they told to me to ask Seagate... I asked Seagate
and they explained to me the problem seems to be software/driver/OS
related.

So... Now I'm stuck and I can't install my encryption software. What can
I do. Could it be a problem of Windows Vista ?

Aramys

PS : I use the latest computer bios, updated Vista and latest Intel
chipset driver. The HDD health has been checked with a dozen of Linux or
Windows tools. It's in perfect condition.

You use different motherboard drivers in Linux than you do in Windows.
Apparently there is a problem with the Windows drivers since you know the
hard drive is fine. Suggest you contact the encryption software mftr.'s
tech support.


Malke
--
MS-MVP
Elephant Boy Computers - Don't Panic!
http://www.elephantboycomputers.com/#FAQ

.

Relevant Pages

  • HDD last sector uneadable under Vista... readable under Linux
    ... the encryption software I want to use check if the last sector of my HDD is readable before installing. ... I wrote to Asus and they told to me to ask Seagate... ...
    (microsoft.public.windows.vista.hardware_devices)
  • Re: Upgrade W2K from Win98
    ... I attempted a firmware upgrade for my HDD (Seagate ST317221A) which ... Problem is I can't get into windows to ... determine which Intel IDE Controller I have. ...
    (microsoft.public.win2000.setup_upgrade)
  • Re: Index.dat file is almost 9MB, and it takes a long time to writ
    ... BUT, if the disk drive volume FDS is only 600Mb, ... number of central and related issues that have long existed in Windows OS's, ... on one and only one sticky-note, and then only the particular sticky-note ... "if you have one HDD, you only have one storage volume"). ...
    (microsoft.public.windowsxp.general)
  • Re: How do I move files to my new PC?
    ... 'everything' from his old computer running Windows 98. ... Unfortunately he does not have all of his installation CD-ROMs. ... whether they are formatted FAT32 or NTFS. ... is going to cause problems (20 gbyte HDD is 70% full). ...
    (microsoft.public.windowsxp.hardware)
  • Re: XP wont start, Cant use CD drive HeLp!! PLEASE!
    ... Instead of restarting it goes to the windows logo screen for about 4 ... Safe mode with networking ... I have tried putting that in BOTH of my CD rom drives and nothing ... a secondary HDD on a working system is a good one. ...
    (microsoft.public.windowsxp.help_and_support)