Ok, here is the problem. I have an internet work.....everything has
always worked fine. I have 10 devices hooked up to a switch. That
switch is hooked to an internal router (linksys) and that is connected
to my calbe modem.
My router went bad and I had to replace it. Anyhow, everything is
nearly working perfect. I can ping every machine from every machine.
Now I noticed that I cannot send or receive mail on 1 machine. (We
have our own mail server). And, when I try to ping that Vista
machine......it does not work. Which is why I cannot get email
probably.
Anyhow, nothing in Windows has changed. Only thing that changed was
the router. And as I said, everyone can ping everyone, except this
box. This box can ping everyone, but no one can ping it........
Re: moved a working network, now it doesnt work ...router I can ping the internet with no problem. ... From one of your Linux machines can you ping the FA 0/1 interface (default ... are NOT natting so if CAN ping from the router, ... (comp.dcom.sys.cisco)
Re: Trouble obtaining IP address ... So some internet providers will not ... On newer systems, you have to power cycle the cable modem to make it work reliably, with a pause of about a minute between off and on. ... This is what the "clone MAC address" function on routers is for - you log into the router from the system that was originally connected to the cable modem, ... >said I cannot switch Ethernet cable from one computer to another and>expect ... (microsoft.public.windowsxp.network_web)
Re: Can ping default gateway but cannot access internet ... have a Windows XP Pro computer connected to the internet via a D- ... Link 524 Wireless router and a cable modem connection. ...VoIP phone adaptor connected to the same router. ... If I ping yahoo.com, ... (microsoft.public.windowsxp.general)
Re: moved a working network, now it doesnt work ...router I can ping the internet with no problem. ... From one of your Linux machines can you ping the FA 0/1 interface (default ... are NOT natting so if CAN ping from the router, ... (comp.dcom.sys.cisco)
Re: Joining Two Large Network ... The "router interfaces" of a Layer3 Switch are created with VLans... will need each side to keep using their Internet Device as their Default Gateway ... (microsoft.public.windows.server.networking)
