Re: High CPU system process during boot when using Wireless

Tech-Archive recommends: Speed Up your PC by fixing your registry

If you suspect an update is related you might want to also ask in the windowsupdates newsgroup if anybody is reporting a specific update causing your symptom.

"Martijn van Schie" <mvanschie@xxxxxxxxxxxxxxxx> wrote in message news:AEE7A1C2-DED3-407E-B84B-FA443CE5A86B@xxxxxxxxxxxxxxxx
It's a thought, but it has been working fine for 2 years.

I heared that sometime drivers conflict after being updates. Perhaps this is the case.
I was wondering if this sounded familiar to anybody.
"mikeyhsd" <mikeyhsd@xxxxxxxxxxxxx> wrote in message news:%23fqtWDF2IHA.1036@xxxxxxxxxxxxxxxxxxxxxxx
might look into replacing the adapter.
since you say there are NO new driers for it.
sounds like it is not very well supported.



mikeyhsd@xxxxxxxxxxxxx

"Martijn van Schie" <mvanschie@xxxxxxxxxxxxxxxx> wrote in message news:03DD0E32-2D95-48EF-B3D4-E57B8DC7281A@xxxxxxxxxxxxxxxx
I've recently been having problems while vista is booting.

Sometimes, during boot, my CPH utilization is an average of 90% for a minute
or 5. During this time, the process system is taking up all the resources.
Ater this period my mouse stops working, and the screen goes blank. Capslock
is still responsive, bit that about it.

I noticed that during these times, my network icon has a red cross in it.
I found that there seams to be a relation with my wireless card, because it
is alway enabled when this occures.
When i diable the wireless adapter during boot, and enable it after the
system has normally booted, everything is fine.

I've been looking for new drivers, but there are none.

Does anybody have this issue, or know a fix for it (besides the workaround
with the disabled wireless adapter).

Regards,
Martijn

.

Relevant Pages

  • RE: Win XP no longer able to access LAN with win 98SE machines
    ... for your wireless adapter. ... wired adapter installed on one of my XP machines and the upgrade to XP SP2 ... the wired router is connected to port one of a wireless router, ...
    (microsoft.public.windowsxp.network_web)
  • Wireless USB Disconnects Work Around?
    ... my 802.11b wireless USB adapter disconnects randomly and without ... multiple wireless channels, played with all available "preamble type" ... share IRQ's with the USB host controller. ... I used a command built into Windows XP ...
    (microsoft.public.windowsxp.network_web)
  • Re: Limited or no connectivity after installing SP2
    ... >> connectivity by using a wired connection. ... >> My wireless equipment is all Dlink. ... Check your adapter settings ... > getting an IP address assignment from your DHCP host. ...
    (microsoft.public.windowsxp.network_web)
  • Re: How to boost our Linksys WRT150Ns signal -- across the house?
    ... to powerline network adapters ... router) in your wireless clients. ... Seriously consider getting a PCMCIA or USB Wi-Fi adapter that supports ... Did wireless work or not on both the router and the access point? ...
    (alt.internet.wireless)
  • Re: Wireless Internet Connection drops when LAN Adapter Enabled
    ... I also have a Netopia 2247NWG-VGx wireless ... the time so I know the USB adapter is OK. ... I enable the LAN Adapter ... RTL8139 Family PCI Fast Ethernet NIC but that shows the same symptoms. ...
    (alt.internet.wireless)