Re: Vista Dual Monitors

Nope got the new Video Card in the mail today and to no aval. I can still not get it to hook up.

Also I hooked up my notebook via vga cable and it worked fine. This has to be something in Windows any ideas?

"Martin Stein" <steinmh@xxxxxxxxxxx> wrote in message news:FD047A8A-BB7A-455B-B181-44EAB4AAFF5D@xxxxxxxxxxxxxxxx
Attach the monitor to another computer and see if it works there. Maybe it's the monitor?

Try turning everything off, unplug the power for a minute and then boot back up.

Maybe your motherboard BIOS needs updating? Unlikely though.

Maybe it's the cable?

.

Relevant Pages

  • Re: Failing to boot XP
    ... I have Western Digital diagnostic tool running at boot up and there was no ... The original BSOD stated there was a video card driver problem and that the ... system was in an endless loop because of a hardware or software problem. ... BSOD this time referring to the Nvidia driver. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Redhat Freeze
    ... Changing Runlevels at Boot Time ... it is possible to change the default runlevel at boot ... Troubleshooting Your Video Card ... The X Configuration Tool backs up your system's original video configuration ...
    (alt.os.linux.redhat)
  • Re: computer randomly restarts
    ... The second part sounds like the BIOS are not initializing the Video card, ... thus no light on the monitor. ... I've seen several causes, from a loose video card, loose RAM chip, loose ... got so it would boot one out of 5 tries, then freeze within a few minutes. ...
    (microsoft.public.windowsxp.general)
  • Re: IGFXCFG.EXE
    ... not come up, put in a new video card, nvideo geo force 990 or something ... the hardware could be good and the computer severely infected - ... You can back up data even when you can't boot into Windows if the hard drive ... http://michaelstevenstech.com/cleanxpinstall.html - Clean Install How-To ...
    (microsoft.public.windowsxp.general)
  • Re: =?windows-1252?Q?Won=92t_boot_past_Chip_message=2E?=
    ... So I was recently moving files from one HD to the new 120 GB HD I ... mainboard except CPU, RAM, and video card - that means removing all PCI ... Once all peripherals are disconnected, the system should boot to the ... "Boot Disk Failure" or similar message). ...
    (microsoft.public.windowsxp.hardware)