Re: Blue AScreen System_Service_Exception

Wow, you have me working overtime but I shall Endeavour to try out try out all of the suggestions as time allows.

My dear wife of 42 years is rather ill and that causes me to spend much time with her and not at this keyboard. You must know the drill, CHORES; that are added to the usual and my mind on her health more than a bloody computer.

BUT, on the happy side, no further Blue screens as of this writing. Perhaps Win Vista has settled down and will give to me a break from the concern of another crash?

Many thanks for your thoughtful concern for a old poop and his delinquent computer that has it's own eruptions at times. <grin>

I have printed your messages and will work on them as time and attention demands allows.

Again thank you.

Barron aka drybones




"Chad Harris" <Windows7@xxxxxxxxxxxxxxxxxx> wrote in message news:uJAvNLhSJHA.4084@xxxxxxxxxxxxxxxxxxxxxxx
Dry Bones--

I mistakenly typed the wrong cmd to use from the command prompt. It should be::


bootrec /Rebuild BCD
bootrec /fixmbr
bootrec /scanos
bootrec /Fixboot

***Using the F8 Environment***


***Taking Full Advantage of the F8 Options (Windows Advanced Options Menu)
by starting the PC and tapping F8 once per second when the firmware screen
with the pc manufacturer's name shows a few seconds after restarting***:


The F8 options in Vista are the same as XP, and the link for Safe Mode Boot
options is labled XP by MSFT but they are the same for Vista (they haven't
updated to add Vista to the title as they have with several MSKBs that apply
to both).


Again, pressing F8 repeatedly when you seem the firmware screen may be is a
generic way to launch Windows RE on some OEM Vista computers.


You could also:


Think: I have 4 different ways to get back my XP at F8 and try 'em in order.
1) Safe Mode 2) Safe Mode with Cmd to Sys Restore which is simply a cmd
prompt in safe mode 3) Safe Mode with Neworking 4) LKG or Last Known Good
Configuration


Try to F8 to the Windows Adv Options Menu>try 3 safe modes there (I don't
use WGA) and Last Known Good>then I go to Win RE in Vista. That gives you a
choice of Safe Mode, Safe Mode with Networking,and Safe Mode with Command
Prompt.


These methods are outlined in


A description of the Safe Mode Boot options in Windows XP/and Vista
http://support.microsoft.com/kb/315222/


Frequently Asked Questions Regarding System Restore from MSFT:


http://www.microsoft.com/technet/prodtechnol/winxppro/plan/faqsrwxp.mspx


System Restore can be run from the Win RE recovery environment from the same
link as Startup Repair, and sometimes it will work from one F8 safe mode
location or from the Win Recovery Environment when it won't work from other
locations.


How to start the System Restore tool at a command prompt in Windows XP


http://support.microsoft.com/default.aspx?scid=kb;en-us;304449


Good luck,


CH




I shall Endeavour over the next couple of days to utilize your ideas. As
this old boy is 80 years young it takes me a bit longer than most to get things accomplished.

Will leave these 4 posts on the server so that I night reply with either good or bad news.

Machine has worked quite well <grimace> since the Sunday episode for whatever that amounts to we shall see.

Again I do thank you.

drybones


"Chad Harris" <Windows7@xxxxxxxxxxxxxxxxxx> wrote in message news:%23%23RovjaSJHA.588@xxxxxxxxxxxxxxxxxxxxxxx
Hi Drybones--

System service errors like this one can be caused by a myriad of errors. You can always test s video driver and this should work in Vista:
http://support.microsoft.com/kb/314854/EN-US/

Among the most common problems that generate this error message:

1) Any third party app or a device driver of *any kind.* As Rick said, Video Drivers are probably the most frequent.
2) Improper security settings being applied to system files.
3) System File Mismatches but when backups are done with Vista Backup and restored this doesn't happen.

If you recently updated a driver, roll back the driver to an earlier version using Device Manager. Make sure all your drivers fro devices are the most recent the manufacturer offers compatible with Vista, but Windows Update should be doing this job in most cases. History helps on apps--did you install any recent apps and get this problem soon after? Sometimes in office or enterpriser environments an admin decides to strip the permissions from the C Drive by removing the System Account from a C Drive's control list but in this day of Hyper-V using Win Server 2008 and running System Center VM Manager 2008 or System Center Operations Manager their are such comprehensive reports this is unlikely to happen or should be caught quickly in a business or enterprise environment and you're not in one here afaI can tell.


I'd try the following:

1) If you have a Vista DVD, I'd put it in and use Startup Repair.

How to Use Startup Repair:
http://windowshelp.microsoft.com/Windows/en-US/Help/5c59f8c1-b0d1-4f1a-af55-74f3922f3f351033.mspx#EX

http://www.bleepingcomputer.com/tutorials/tutorial148.html

2) If StR doesn't work, try the bootrec .exe tool:

Put in the Vista DVD and select cmd prompt from the menu that shows up. Then type one after the other these switches. You'll get a successful after each one runs.


bcedit.exe /fixmbr
bcedit.exe /fixboot
bcedit.exe/RebuildBCD

3) All of the F8 options using System Restore and then LKG (Last Known Good).

These assume of course that there is no hdw problem like memory sticks, hdw devices and drivers, hard disc errors, MOBO problems etc.

Good luck,

CH



"drybones" <drybones@xxxxxxxxxxx> wrote in message news:u8CrrIZSJHA.3880@xxxxxxxxxxxxxxxxxxxxxxx
Thanks for feed back Rick.

ATI drivers I have are dated 6/2/08 and are 8.5.00 version.

I did go to ATI and found these drivers: 8.11_Vista64 and attempted to
install.
http://game.amd.com/us-en/drivers_catalyst.aspx?p=vista64/common-vista64

I allowed the ATI download program to install and got into much trouble so
had to go back to Restore to earlier save.

Should I make another attempt from the Safe Mode and remove existing video
drivers first via System / Device manager / Display adapters and then re-try
the install?

Yesterday was much frustrating.

Many thanks again,
drybones


"Rick Rogers" <rick@xxxxxxxx> wrote in message news:OcFwt8WSJHA.1960@xxxxxxxxxxxxxxxxxxxxxxx
Hi,

First suspect would be video drivers, see if there is an updated set available for your video adapter.

--
Best of Luck,

Rick Rogers, aka "Nutcase" - Microsoft MVP
http://mvp.support.microsoft.com/
Windows help - www.rickrogers.org
My thoughts http://rick-mvp.blogspot.com

"drybones" <drybones@xxxxxxxxxxx> wrote in message news:unH%23UpOSJHA.5568@xxxxxxxxxxxxxxxxxxxxxxx
Windows Vista Home Premium X64 bit
Antec 300 Case Antec 1000 watt Power Supply
Intel DP45SG Motherboard
Intel Core 2 Quad 3.0GHz Processor
8GB 1333MHz DDR-3 Non-ECC Corsair Memory
2 Gigabyte HD4870 1GB 2-DVI PCIe in CrossFire
Windows Vista Premium 64 bit on a WD Caviar SE16 500GB HD
Windows XP Pro SP3 on a Seagate Barracuda 500GB HD
3rd HD for Backup Seagate Barracuda 500GB [Vista only]
Maxtor 500GB 1 - Touch 4 Plus Drive External Backup [Win XP Pro]
Samsung 245T Monitor

System_Service_Error Message below:

System_Service_Exception
If this is the first time you've seen this Stop Error Screen restart your computer. If this screen appears again follow these steps:

Check to make sure sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any Windows Updates you might need.

If problems continue, disable or remove any newly installed hardware or software, disable bios memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F* to select advanced startup options, then select Safe Mode.

Technical Information:
*** Stop: 0X0000003B (0X00000000C000001D, 0XFFFFFA500679425F0,
0X0000000000000000)

*** WIN32K.SYS-Address FFFFF9600028E64F Base at FFFFF960000D0000, date stamp 48D1BCA9

Collecting data for crash dump...
Initializing disk for crash dump... Dumping Physical Memory to Disk: 100
Physical Memory Dump complete...
Contact your system admin or technical support for further assistance.

Computer had been on about 2 hours and I had Win Mail open and Internet Explorer was also open and was reading Washington Post News articles when this stop happened.

Any ideas are very welcome.

--
Thanks for reading & responding,
Barron AKA drybones






.

Relevant Pages

  • Re: Blue AScreen System_Service_Exception
    ... bootrec /Rebuild BCD ... The F8 options in Vista are the same as XP, and the link for Safe Mode Boot ... Make sure all your drivers fro devices are the most recent the manufacturer offers compatible with Vista, but Windows Update should be doing this job in most cases. ...
    (microsoft.public.windows.vista.general)
  • Re: Event Viewer - "unexpected shutdowns"
    ... be advised I ran the 'repair' options within the last two weeks a few times by booting from the Vista CD. ... The memory diagnostic tool ran cleanly - as reported during the test and after the reboot - nothing to report. ... The attempted chkdsk from the command prompt reported that I did not have the privilege & advised I had to run in 'elevated mode' - I had never heard or read such a term & have been a PC enthusiast since Windows 3.0 from 1990. ... PS - I should add that upon rebooting after an unexpected shutdown - Vista asks if Safe Mode is desired during rebooting. ...
    (microsoft.public.windows.vista.general)
  • Re: Blue AScreen System_Service_Exception
    ... There are some great helpers including a lot of IT pros, on these groups, who have long experience with Windows and operate at a very professional level. ... Perhaps Win Vista has settled down and will give to me a break from the concern of another crash? ... The F8 options in Vista are the same as XP, and the link for Safe Mode Boot ... Make sure all your drivers fro devices are the most recent the manufacturer offers compatible with Vista, but Windows Update should be doing this job in most cases. ...
    (microsoft.public.windows.vista.general)
  • Re: Event Viewer - "unexpected shutdowns"
    ... be advised I ran the 'repair' options within the last two weeks a few times by booting from the Vista CD. ... The memory diagnostic tool ran cleanly - as reported during the test and after the reboot - nothing to report. ... The attempted chkdsk from the command prompt reported that I did not have the privilege & advised I had to run in 'elevated mode' - I had never heard or read such a term & have been a PC enthusiast since Windows 3.0 from 1990. ... PS - I should add that upon rebooting after an unexpected shutdown - Vista asks if Safe Mode is desired during rebooting. ...
    (microsoft.public.windows.vista.general)
  • Re: Blue AScreen System_Service_Exception
    ... There are some great helpers including a lot of IT pros, on these groups, who have long experience with Windows and operate at a very professional level. ... Perhaps Win Vista has settled down and will give to me a break from the concern of another crash? ... The F8 options in Vista are the same as XP, and the link for Safe Mode Boot ... Make sure all your drivers fro devices are the most recent the manufacturer offers compatible with Vista, but Windows Update should be doing this job in most cases. ...
    (microsoft.public.windows.vista.general)
Loading