Re: How to speed up this process

I would search for an "F", which denotes the feed in inches or mm per
minute. eg F12.50 then I would like to change the value to say F15.75
or maybe a 10% increase from F12.50 to F13.75, so basically
all numbers to the right of the "F" to the next space,I'd do this after
I "space" the file.Since this is an in house utility I write my cnc
programme,run it on the machine and make adjustments to the programme
feeds, with a override switch on the machine, if needed.Save the
programme back to the computer,Now I want to make the feed changes so
next time I run it the feeds are right.A lot of machining is,these are
the theoretical feeds now we make real world adjustments.
SteveC

.

Relevant Pages

  • Re: How to speed up this process
    ... > programme,run it on the machine and make adjustments to the programme ... > programme back to the computer,Now I want to make the feed changes so ... > next time I run it the feeds are right.A lot of machining is,these are ... > the theoretical feeds now we make real world adjustments. ...
    (microsoft.public.vb.general.discussion)
  • laser printer dimensional accuracy?
    ... I picked up a used Phaser 750 laser. ... On this printer, paper feeds in the y direction, so the dimensional ... Anybody know if there's a way to correct for it on a Phaser 750? ... nothing about feed servo adjustments, ...
    (comp.periphs.printers)
  • Re: Epson Photo 1400 and Stylus R 380
    ... approximately an inch to 2 inches and then it stops. ... It feeds the ... to be a setting with the WIndows Vista that I have on this new ...
    (comp.periphs.printers)
  • Epson Photo 1400 and Stylus R 380
    ... I am trying to print pictures from photo program and it will only ... approximately an inch to 2 inches and then it stops. ... It feeds the ...
    (comp.periphs.printers)