Re: setup ms project 2003 and wss

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance


Surely the Project Server newsgroup would be a better place for this
discussion.

microsoft.public.project.server

That's after all where all the Project MVPs are.

Manfred

"Frédéric de Thysebaert" <frdt@xxxxxxxxxxxxxx> wrote in message
news:OY3IZc2lFHA.1416@xxxxxxxxxxxxxxxxxxxxxxx
> Thanks
> I understand but .. :) .. when I setup a excluded path with "define
> managed path" as by example the name "/msp"
> and setup http://name:8080/msp as link in Connect to Sharpoint server I
> get the message " you can not create the root web "/msp/MS_PWA...blabla "
> unless an explicit inclusion or a proper wildcard inclusion is defined"
> I though that msproject sites must be managed by wss and than setup as
> include.
> What about this ?
> Sorry for my mistake :(
>
> fr
>
> "Yorick" <Yorick@xxxxxxxxxxxxxxxxxxxxxxxxx> a écrit dans le message de
> news: 80576F81-0C1C-43F8-B504-703D5219A7F7@xxxxxxxxxxxxxxxx
>> The MS Project site should NOT be http://name:8080/sites/TEST. All
>> subdirectories underneath /sites are reserved for WSS. This because the
>> /sites directory is defined as a "Included Path > Wildcard inclusion"
>> type
>> and not an "Excluded Path".
>> You should create your own Excluded path.
>>
>> Regards,
>>
>> Yorick
>>
>> "Frédéric de Thysebaert" schreef:
>>
>>> I had searching in this way but all seams to be right
>>>
>>> the virtual server extended by wss is http://name:8080
>>> in the url path to create sites ( under Connect to Sharpoint server) I
>>> setup
>>> the link as http://name:8080/sites
>>> It's at this point that when a save the config I get the error
>>> The root site http://name:8080 is accessible with the site template ms
>>> project.
>>> Under administration of wss and "define managed path" the path "/sites"
>>> exist as managed by wss
>>> I think the new created sites must shall be bottom with a url as
>>> http://name:8080/sites/TEST
>>>
>>> thnaks
>>>
>>> "Yorick" <Yorick@xxxxxxxxxxxxxxxxxxxxxxxxx> a écrit dans le message de
>>> news:
>>> 429970DC-1DFC-45E9-912F-D2DEBB1B5271@xxxxxxxxxxxxxxxx
>>> > Hi Frédéric,
>>> >
>>> > I haven't used Project Server before, but what might be an option (ran
>>> > into
>>> > similar problems in the past with Visual Studio projects) is to
>>> > configure
>>> > a
>>> > managed path.
>>> > Normally Sharepoint picks up every directory you are trying to reach.
>>> > By
>>> > configuring a managed path you can tell Sharepoint which directory
>>> > names
>>> > must
>>> > be left alone.
>>> >
>>> > To configure a managed path, do the following:
>>> > - Open the Sharepoint Central Administration
>>> > - Select "Configure Virtual Server Settings"
>>> > - Select your virtual server
>>> > - Select "Define Managed Paths"
>>> > - In the Add a New Path section enter the directory name, for example
>>> > "/TEST" and
>>> > select "Excluded path" as type and click OK.
>>> > - No do exactly the same in Project Server as you did before and
>>> > create a
>>> > project in the directory "Test".
>>> >
>>> > Hope this is the answer to your problem.
>>> >
>>> > Regards,
>>> >
>>> > Yorick
>>> >
>>> > "Frédéric de Thysebaert" schreef:
>>> >
>>> >> hi
>>> >> When I setup MS project server 2003 through "project web access" in
>>> >> "manage
>>> >> windows Sharpoint services" / "Connect to Sharpoint server"
>>> >> when I click [save Changes] I get the "Project server can not define
>>> >> site'properties for the new created site TEST"
>>> >> Any ideas
>>> >> thanks
>>> >>
>>> >>
>>> >>
>>>
>>>
>>>
>
>


.

Relevant Pages

  • Re: Separate Intranet and Extranet Servers?
    ... WSS will not make a great FTP replacement, ... SharePoint server. ... I also don't want partners to be able to view other ...
    (microsoft.public.sharepoint.windowsservices)
  • Re: Front End WSS3.0 Server
    ... WSS only listens to addresses for web applications that are in AAM. ... Another use for zones for a web application is when you extend a web app. ... When you add a second WFE to a server farm, WSS assumes that it will be ...
    (microsoft.public.sharepoint.windowsservices)
  • Re: wss disaster recovery - CompanyWeb Error.bmp (0/1)
    ... restored the wss based on KB827701 and there are errors. ... >please attach a screen shot to newsgroup. ... you may want to contact Microsoft CSS directly. ... >| I have a wss site which was installed on an SBS2003 server. ...
    (microsoft.public.windows.server.sbs)
  • Re: wss disaster recovery
    ... restored the wss based on KB827701 and there are errors. ... >please attach a screen shot to newsgroup. ... you may want to contact Microsoft CSS directly. ... >| I have a wss site which was installed on an SBS2003 server. ...
    (microsoft.public.windows.server.sbs)
  • Re: Anonymous user on wss setup
    ... I do not want an anonymous user to get to the website. ... Our users are logged onto the network, and the wss server is on the ... > not use Active Directory accounts but need access to the WSS documents. ...
    (microsoft.public.sharepoint.windowsservices)