Re: SQL 2005 cluster setup

Yes, You can create a VLAN using the switch and configure all 4 nodes to
listen for heartbeat on this. in fact, this is the recommended way to
configure heartbeat when you have more than 2 nodes.

"vision" <vision@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:7244AA65-BA3F-49A9-B8FA-494B5732F86C@xxxxxxxxxxxxxxxx
I want to configure a 4 node cluster
I have setup a 2 node prior, I have a question regarding heartbeat. Is it
possible to have all 4 nodes communicate on a private set of ip through a
switch instead of a cross over cable connecting 2? I want all 4 to talk
to
each other on the heartbeat side.

ie. ip for all heartbeats 192.168.1.1-192,168.1.4


.

Relevant Pages

  • Re: Cluster Node - [WP]
    ... The binding order is correct and there is not gateway of the private ... only TCP/IP bound to the heartbeat adapters? ... xover or switch between the heartbeat NIC's and the LAN NIC for ... Got a 2 node cluster running fine. ...
    (microsoft.public.exchange.admin)
  • Re: FreeBSD 7 server in hang
    ... any stack don't work and heartbeat don't switch the ... resources I can't loggon and I must reboot. ...
    (freebsd-questions)
  • Re: Obama Was Selected, Not Elected
    ... advance their cause at the moment, switch talking points in a ... heartbeat, and then act indignant if anyone uses the exact same ...
    (rec.sport.football.college)
  • Re: mc/serviceguard cluster fails once
    ... the cluster made a fail-over. ... interfaces for heartbeat, I check recently and the ping went pretty well. ... don't put all interfaces on the same switch. ...
    (comp.sys.hp.hpux)
  • Re: Minimize HeartBeat
    ... The problem is with the cards with crosslinked cables. ... connected to a switch. ... I want the HeartBeat to go through this cable. ...
    (microsoft.public.windows.server.clustering)
Loading