Is there any way that I can boot a client up using the OSD Image CD,
and then assign a static IP address before attempting to connect to the
SMS DP? We have a some systems on a network where there is no DHCP
server and all clients have static IP's.
Re: I am stumped SP1 and Memory Error ... If the client has a support contract with Dell, I would call them to find ... > installed the service pack, and then called me because the system would no ... I removed the 4-128 sticks and attempted to boot, no joy, I removed the ... > the server, which we did. ... (microsoft.public.windows.server.sbs)
Remote Boot ... I am trying to boot a FreeBSD diskless client with no success. ... Actually, I can boot the client, the kernel is downloaded and begins ... Then it tries to reach the DHCP/BOOT server,... (freebsd-net)
Re: OpenVMs Cluster ... We took another Client with Operating System ... >The boot parameter on the new Client: ... That's the message I get if the server is down, ... double-check the hardware address: ... (comp.os.vms)
Re: Jumpstart boot problem Solaris 9 ... I have a single server set up as a boot/install/config server to install ... Snoop shows hundreds of messages showing the client request a file. ... I would try doing a plain "boot net -s" from the OBP to see that the ... (comp.unix.solaris)
DHCP, dual NIC, DHCP failure ... abandon the DHCP protocol about 50% of the time. ... and a Win2003 server that was both boot server and DHCP server.... It appears to me that the DHCP client runs independent threads to execute this ... (microsoft.public.windowsxp.embedded)
