Re: OSD restore phase problem

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: "Michael Niehaus [MS]" <mniehaus@xxxxxxxxxxxxxxxxxxxx>
Date: Thu, 3 Nov 2005 20:01:59 -0800

Is it possible that the machines aren't getting a DHCP address fast enough?
Often this can represent a network configuration issue (on Cisco switches,
they typically should be configured for "spanning-tree portfast").

-Michael Niehaus
Systems Design Engineer
mniehaus@xxxxxxxxxxxxx
This posting is provided "AS IS" with no warranties, and confers no rights.

"Huynh, T" <thuynh@xxxxxxx> wrote in message
news:BF8F8F64.18C34%thuynh@xxxxxxxxxx
> Additional information about the problem. I put in a sniffer on the
> reproducible problem with the HP NC6000 laptop and the restore phase.
> It looks like an AD replication issue. It just needs additional time.
> Is there a way to slow down the restore process? I.e. Not have it kick in
> so quickly after the mini setup reboot? Perhaps increase the time before
> it
> gives up on the process? I am not seeing this problem with other machines
> because they are not so fast at rebooting?
>
> Thanks,
> -T
>
>
> On 11/2/05 3:26 PM, in article BF8E8B34.18892%thuynh@xxxxxxx, "Huynh, T"
> <thuynh@xxxxxxx> wrote:
>
>> I am experiencing some abnormal behavior in which some of my target
>> machines
>> will report it can not connect to the installation package on the
>> distribution point (\\\\SMS-SS1\SMSPKGD$\MP10007C). No network provider
>> accepted the given path. (800704B3).
>>
>> I am almost certain it's not the sms server or distribution point that is
>> having problems (works for some machines and not others in a small 5
>> machine
>> pilot) It certainly is not the network bandwidth as the I'm seeing left
>> than
>> 4 percent network utilization. It can't be sever IO since it's such a
>> small
>> pilot. I can connect to the share from another machine when this message
>> pops up.
>>
>> Going from Windows 2000 to windows XP SP1.
>> SMS 2003 SP1 on Windows 2003 server
>>
>> Is there anything I should be looking for to figure out what the problem
>> is?
>>
>> This is the OSDagent.log file showing the errors.
>>
>> Parsing param: /restore $$<OSDAgent><Mon Oct 31 8:33:56.530 2005 Eastern
>> Standard Time><thread=1816 (0x718)>
>> OSDAgent will be executing in restore mode. $$<OSDAgent><Mon Oct 31
>> 8:33:56.540 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Shared environment successfully initialized $$<OSDAgent><Mon Oct 31
>> 8:33:56.620 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Got connection request for \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon
>> Oct
>> 31 8:33:56.620 2005 Eastern Standard Time><thread=1816 (0x718)>
>> OS Version: 261 $$<OSDAgent><Mon Oct 31 8:33:56.630 2005 Eastern
>> Standard
>> Time><thread=1816 (0x718)>
>> Connecting to \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon Oct 31
>> 8:33:56.630 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Failed to connect to \\SMS-SS1\SMSPKGD$\MP10007C (1203). Retry in 10
>> seconds. $$<OSDAgent><Mon Oct 31 8:33:57.932 2005 Eastern Standard
>> Time><thread=1816 (0x718)>
>> Connecting to \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon Oct 31
>> 8:34:07.936 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Failed to connect to \\SMS-SS1\SMSPKGD$\MP10007C (1203). Retry in 20
>> seconds. $$<OSDAgent><Mon Oct 31 8:34:08.016 2005 Eastern Standard
>> Time><thread=1816 (0x718)>
>> Connecting to \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon Oct 31
>> 8:34:28.035 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Failed to connect to \\SMS-SS1\SMSPKGD$\MP10007C (1203). Retry in 30
>> seconds. $$<OSDAgent><Mon Oct 31 8:34:28.035 2005 Eastern Standard
>> Time><thread=1816 (0x718)>
>> Connecting to \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon Oct 31
>> 8:34:58.048 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Failed to connect to \\SMS-SS1\SMSPKGD$\MP10007C (1203). Retry in 40
>> seconds. $$<OSDAgent><Mon Oct 31 8:34:58.048 2005 Eastern Standard
>> Time><thread=1816 (0x718)>
>> Connecting to \\SMS-SS1\SMSPKGD$\MP10007C $$<OSDAgent><Mon Oct 31
>> 8:35:38.066 2005 Eastern Standard Time><thread=1816 (0x718)>
>> CHECK FAILED: (iTry < 5) || (uRet == 1219L) (Error = 800704B3)
>> $$<OSDAgent><Mon Oct 31 8:35:38.066 2005 Eastern Standard
>> Time><thread=1816
>> (0x718)>
>> Failed to connect to \\SMS-SS1\SMSPKGD$\MP10007C (1203) $$<OSDAgent><Mon
>> Oct 31 8:35:38.076 2005 Eastern Standard Time><thread=1816 (0x718)>
>> CHECK FAILED: reconnect() (Error = 800704B3) $$<OSDAgent><Mon Oct 31
>> 8:35:38.086 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Stat Msg: 3221236577
>> MachineName=L2-14063
>> ClientID=GUID:6F3AD515-B891-46BD-A69D-6941CF0019B0
>> ProcessID=#1764
>> ThreadID=#1816
>> Win32ErrorCode=#0
>> DateTime=20051031133538.106000+000
>> Attrib400=MP10007C
>> Attrib401=MP1203B1
>> Insert1=\\SMS-SS1\SMSPKGD$\MP10007C
>> $$<OSDAgent><Mon Oct 31 8:35:38.106 2005 Eastern Standard
>> Time><thread=1816 (0x718)>
>> Connecting to server SMS-SS1 on port 80 $$<OSDAgent><Mon Oct 31
>> 8:35:38.106
>> 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Successfully resolved server SMS-SS1 to 63.244.253.67 $$<OSDAgent><Mon
>> Oct
>> 31 8:35:38.126 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Successfully connected to server SMS-SS1 $$<OSDAgent><Mon Oct 31
>> 8:35:38.126 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Status message was successfully received by server SMS-SS1
>> $$<OSDAgent><Mon
>> Oct 31 8:35:52.116 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Running command line: "\\SMS-SS1\SMSPKGD$\MP10007C\osdenv.exe"
>> /UnRegServer
>> $$<OSDAgent><Mon Oct 31 8:35:52.126 2005 Eastern Standard
>> Time><thread=1816
>> (0x718)>
>> Successfully unregistered OSD environment object. $$<OSDAgent><Mon Oct
>> 31
>> 8:35:52.927 2005 Eastern Standard Time><thread=1816 (0x718)>
>> The operating system installation failed. Please contact your system
>> administrator for assistance.
>>
>> Could not connect to the installation package on
>> \\SMS-SS1\SMSPKGD$\MP10007C. No network provider accepted the given
>> network
>> path. (800704B3)
>>
>> This message will automatically close in 30 minutes. $$<OSDAgent><Mon
>> Oct
>> 31 8:35:52.947 2005 Eastern Standard Time><thread=1816 (0x718)>
>> CHECK FAILED: g_JobEng.execute() (Error = 800704B3) $$<OSDAgent><Mon Oct
>> 31
>> 9:36:41.282 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Installation failed with error code 800704B3 $$<OSDAgent><Mon Oct 31
>> 9:36:41.282 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Creating the temp logs folder : C:\WINDOWS\TEMP\SMSOSD $$<OSDAgent><Mon
>> Oct
>> 31 9:36:41.282 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Saving Logs into the Temp Folder : C:\WINDOWS\TEMP\SMSOSD
>> $$<OSDAgent><Mon
>> Oct 31 9:36:41.452 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Cleaning up the Minint Folder $$<OSDAgent><Mon Oct 31 9:36:56.594 2005
>> Eastern Standard Time><thread=1816 (0x718)>
>> Archive File is present - not cleaning up the folder $$<OSDAgent><Mon
>> Oct
>> 31 9:36:56.654 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Jobengine.execute returned code 800704B3 $$<OSDAgent><Mon Oct 31
>> 9:36:56.674 2005 Eastern Standard Time><thread=1816 (0x718)>
>> CHECK FAILED: g_OSDAgent.Run() (Error = 800704B3) $$<OSDAgent><Mon Oct
>> 31
>> 9:36:56.684 2005 Eastern Standard Time><thread=1816 (0x718)>
>> Error Deployment agent failed to complete. Code 0x800704b3
>> $$<OSDAgent><Mon
>> Oct 31 9:36:56.694 2005 Eastern Standard Time><thread=1816 (0x718)>
>>
>
>

.

References:
- OSD restore phase problem
  - From: Huynh, T
- Re: OSD restore phase problem
  - From: Huynh, T

Prev by Date: Re: Initialization failure: Package path not set and error 80004005
Next by Date: Re: OKOKOK is there any easy way to set just one variable?
Previous by thread: Re: OSD restore phase problem
Next by thread: Re: USMT (Scanstate/Loadstate) problems with large mounts of data
Index(es):
- Date
- Thread

Relevant Pages

Re: OSD restore phase problem
... reproducible problem with the HP NC6000 laptop and the restore phase. ... I am not seeing this problem with other machines ... > will report it can not connect to the installation package on the ... > pilot) It certainly is not the network bandwidth as the I'm seeing left than ...
(microsoft.public.sms.tools)
Re: Can find Vista box, cant share folders or printers.
... When I click 'Network' on the laptop the ... I've disabled Norton and Windows firewall entirely to make sure that's not ... public folder sharing - on ... start by running the Network Setup Wizard on all machines (see ...
(microsoft.public.windows.vista.networking_sharing)
Re: XP to Vista -- only halfway there
... concerning networks that combine Vista and XP machines. ... I am setting up an inhouse network that links together three machines, ... by 1) a misconfigured firewall or overlooked firewall (including stateful ...
(microsoft.public.windows.vista.networking_sharing)
OSD restore phase problem
... I am experiencing some abnormal behavior in which some of my target machines ... I am almost certain it's not the sms server or distribution point that is ... pilot) It certainly is not the network bandwidth as the I'm seeing left than ... Could not connect to the installation package on ...
(microsoft.public.sms.tools)
Re: Audacity and Gentoo
... can only pick up radio 4 when using the TV aerial to ... I freak if my machines disagree by more than about 50 ... > ADSL cable, 2 power cables, one network ...
(uk.comp.os.linux)