Re: OSDAgent unable to begin State Restore phase
- From: "Bob Mac Neill \(MSFT\)" <bobmn@xxxxxxxxxxxxx>
- Date: Thu, 5 May 2005 14:19:09 -0700
Hi - the issue was that we had to have wide open access and no certs - so
the connection was not secured.
Also you'll want to ensure the wireless drivers are available to the OS
Package or Capture Wizard - or add them WinPE.
Regards,
Bob Mac Neill | SMS OS Deployment
This posting is provided AS IS with no warranties and confers no rights
"Bob Mac Neill" <bobmn@xxxxxxxxxxxxx> wrote in message
news:e7X8ALSUFHA.2540@xxxxxxxxxxxxxxxxxxxxxxx
> The timeout and retry values do not exist as variables and cannot be
> adjusted.
>
> From our testing we found Wireless NICs have other issues associated with
> them - I'll see what I can dig up and post later.
>
> Regards,
>
> Bob Mac Neill | SMS OS Deployment
>
> This posting is provided AS IS with no warranties and confers no rights
>
> "akongsjord" <akongsjo@xxxxxxxxxxxx> wrote in message
> news:%2382wkhAUFHA.2128@xxxxxxxxxxxxxxxxxxxxxxx
>>I have discovered that the WLAN adapter is causing the problem connecting
>>to the sms site server. I would still like to know if the timeouts can be
>>adjusted but it is not the answer to this problem. Any observations are
>>welcome.
>>
>> "akongsjord" <akongsjo@xxxxxxxxxxxx> wrote in message
>> news:OsaPLj$TFHA.260@xxxxxxxxxxxxxxxxxxxxxxx
>>>I am deploying a WIM image to a notebook PC that has both wired and
>>>wireless network adapters. During the first restart after MINISETUP the
>>>OSDAgent.log reports that it "Failed to connect to
>>>\\smsserver\share\folder. Retry in 10 seconds" followed by 20, 30 and 40
>>>seconds.
>>> Eventually this fails with "Could not connect to the installation
>>> package on ... No network provider accepted the given network path."
>>>
>>> I suspect that the network adapters are not yet on-line.
>>> Can someone tell me how I might increase the number of re-tries?
>>>
>>
>>
>
>
.
- Follow-Ups:
- Re: OSDAgent unable to begin State Restore phase
- From: Alvin Kongsjord
- Re: OSDAgent unable to begin State Restore phase
- References:
- OSDAgent unable to begin State Restore phase
- From: akongsjord
- Re: OSDAgent unable to begin State Restore phase
- From: akongsjord
- Re: OSDAgent unable to begin State Restore phase
- From: Bob Mac Neill
- OSDAgent unable to begin State Restore phase
- Prev by Date: OSD Error - Could not connect to the installation package
- Next by Date: Re: WIM image failed with exit code 5
- Previous by thread: Re: OSDAgent unable to begin State Restore phase
- Next by thread: Re: OSDAgent unable to begin State Restore phase
- Index(es):
Relevant Pages
|