RE: OSD Image Deployment via SMS advertisement (cannot connect to

Can this thread be deleted. I think it's way TMI.
--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Well, I think that I figured it out. Here's the breakdown.

I'd created an image in WIM format from the OSD tools (Image Capture CD).
image captured just fine. I read that I needed an advanced client network
access account setup so that the computer, when disjoined from the domain,
could still access the distribution point. I setup a local account on the
server. realizing my mistake, I then chagned that account to a domain
account. I captured my image when the computer was using the local user
account. When I changed it, I changed it to a domain admin, so it was able
to access the account. After reading that I shouldn't put domain admin
account there because it replicates down the clients, I changed it to a new
domain account (same name as the local account).

Problem is that in my image, the account information was set to the old
local account which doesn't exist anymore. The username in the osdagent.log
does not display the domain when displaying the username so I assumed that it
received the appropriate account (but it was using the wrong account with the
same username).

Long story short, I didn't have the SLP feature installed on my only site
system. The clients didn't refresh the network access account and kept
failing to install the OS.

3 days it took for me to figure this out. Hope you didn't have to go
through the same headaches I did. There needs to be more flowcharts and
support for OSD.
--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Now, I'm getting a bit disturbed. I put in a domain admin account for the
advanced client network access account and it works. I am assuming that it
didn't work before because the software distrubution settings weren't
replicating to the client or I wasn't updating the userpolicy. Eitherway,
the domain admin account fails once, waits 10 seconds, failes twice, waits 20
seconds, and then succeeds.

The account that isn't working has full rights to the software distrubution
share (smspkge$). It also has admin rights on the destination computer.
What could possibly be the hold up? I'm not sure why one account is working
and the other isn't. In my server's security log, there are no failures.



--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Okay... I rebuilt my test machine, advertised my package to it, and it's now
showing the new software account as the username when trying to deploy the
package. It's still failing though with the same error. In the sms admin
console, I have the advanced client network access account in domain\username
format but in the event viewer and the osdinstall.log file, it shows bad
username and or password.

Successfully intialized Logging. OSDAgent 12/12/2006 11:44:31 AM 3868 (0x0F1C)
OSDAgent was launched by SMS advertisement. OSDAgent 12/12/2006 11:44:31
AM 3868 (0x0F1C)
In COSDAgent::ServiceMain() OSDAgent 12/12/2006 11:44:31 AM 3668 (0x0E54)
OS Deployment Agent executing as service main thread OSDAgent 12/12/2006
11:44:31 AM 3668 (0x0E54)
Shared environment successfully initialized OSDAgent 12/12/2006 11:44:31
AM 3668 (0x0E54)
Server Name : \\HQSMS01, Client Name : \\DELETE-71FF, Username =
smssoftinstall OSDAgent 12/12/2006 11:44:31 AM 3668 (0x0E54)
Trying to match with IP address : \\172.19.12.157 OSDAgent 12/12/2006
11:44:31 AM 3668 (0x0E54)
Failed to connect to \\HQSMS01\SMSPKGE$\FSS0000E (1219). Retry in 10
seconds. OSDAgent 12/12/2006 11:44:32 AM 3668 (0x0E54)
Failed to connect to \\HQSMS01\SMSPKGE$\FSS0000E (1219). Retry in 20
seconds. OSDAgent 12/12/2006 11:44:42 AM 3668 (0x0E54)


Shouldn't it show username = na(domain)\smssoftinstall ??? That's what I
put in the advanced client network access account field. Maybe the
documentation is incorrect and it needs to be in username@domain format? I
don't want to change my network access account and have to wait for all the
other clients to replicate the change to find out. the documentation should
be correct, so I will assume it's correct.

Someone please chime in at any time. I feel i'm talking to myself here.
--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Okay, I guess It's up to me to resolve this. This is day three of my
headache and I think I'm coming to an end of it. What I found out is that
during the package execution for an OSD image deployment via an
advertisement, the program creates the minisetup folder on the root of the c:
drive. In this folder are a few subfolders and a logs folder. In the logs
folder, there are two logs. One log tells you the account that is being used
to test for software distrubution. It appears that my client isn't receiving
the updated software distrubution account that I set with limited
permissions. I've tried several policy refreshes to see if I can get that
information in, but it still uses the same account. I'm going to rebuild my
test machine and push the package again. If it shows the old account trying
to access the share again, then I know it's tied to the package and I will
rebuild my package now that I have a new advanced client network access
account set.

This has been a headache, but I think it's almost over. I love this stuff.

IT - 10 years - SMS - DESKTOP ADMINISTRATION
734.231.6587
Westland, Michigan 48186
--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Here's an addional error from my osdlaunch.log file created in the temp
folder of the current user that was logged on.

Successfully intialized Logging. OSDLaunch 12/11/2006 9:45:37 AM 3420 (0x0D5C)
Detected supported Advanced Client. OSDLaunch 12/11/2006 9:45:37 AM 3420
(0x0D5C)
SMS Client
GUIDGUID:C512A59D-330E-4B90-A0F8-B8C68B6AFEF9 OSDLaunch 12/11/2006 9:45:37
AM 3420 (0x0D5C)
Found Standard Client network access account OSDLaunch 12/11/2006 9:45:37
AM 3420 (0x0D5C)
Error getting image location and access account information. Code
0x80070490 OSDLaunch 12/11/2006 9:45:38 AM 3420 (0x0D5C)
OS Deployment advertisement failed to install OS Deployment agent!. Code
0x80070490 OSDLaunch 12/11/2006 9:45:38 AM 3420 (0x0D5C)
Saving Logs into the Temp Folder :
C:\DOCUME~1\tsnja\LOCALS~1\Temp\SMSOSD OSDLaunch 12/11/2006 9:45:38 AM 3420
(0x0D5C)


--
Nick Aquino
IT Professional
nick.aquino at Hotmail.com


"Nick" wrote:

Good Morning,
Here's my scenario:
Windows Server 2003 R2
Standard Edition
Service Pack 1
SMS 2003 2.50.4160.2000 Build 4160 (AD Scheme Extended, Advanced security)
OSD Feature Pack installed.

I am trying to deploy a test image that I built using the OS Image Capture
CD I created from the SMS Admin Console (Right-click image packages).

Once the wim file is copied to the server's network share that I manually
created, I open SMS admin console, right-click on image packages, and select
"new>operating system image package".

The new package is created. I modify the properties to include the network
drivers (same source as used for the image capture CD, same test computer, so
I know the drivers are good.)

After I add the network drivers, I then create an operating system program,
add the key code, and accept all the defaults.

I then create an advertisement targeting my test machine to deploy the
package to. I make it so that the user can run it independently.

The client (XP pro, sp2, firewall off/disabled, file sharing on, etc...)
receives the advertisement.

The client's execmgr.log file shows:

Policy deleted for advertisement FSS20018 package FSS0000D program GX280
IMAGE DEPLOY execmgr 12/11/2006 12:14:07 PM 3884 (0x0F2C)
Policy arrived for parent program Please Work execmgr 12/11/2006 12:14:07
PM 3020 (0x0BCC)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
{
AdvertisementId = "FSS20019";
ClientID = "GUID:C512A59D-330E-4B90-A0F8-B8C68B6AFEF9";
DateTime = "20061211171407.736000+000";
MachineName = "DELETE-FDEB";
ProcessID = 1520;
SiteCode = "FSS";
ThreadID = 3020;
};
execmgr 12/11/2006 12:14:07 PM 3020 (0x0BCC)
Mandatory execution requested for program Please Work and advertisement
FSS20019 execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Creating mandatory request for advert FSS20019, program Please Work, package
FSS0000E execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Requesting content from CAS for package FSS0000E version
1 execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
{
AdvertisementId = "FSS20019";
ClientID = "GUID:C512A59D-330E-4B90-A0F8-B8C68B6AFEF9";
DateTime = "20061211171407.939000+000";
MachineName = "DELETE-FDEB";
PackageName = "FSS0000E";
PackageVersion = "1";
ProcessID = 1520;
ProgramName = "Please Work";
SiteCode = "FSS";
ThreadID = 1344;
};
execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Successfully raised SoftDistWaitingContentEvent event for program Please
Work execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Execution Request for program Please Work state change from NotExist to
WaitingContent execmgr 12/11/2006 12:14:07 PM 1344 (0x0540)
Content is available for program Please Work. execmgr 12/11/2006 12:14:08
PM 3336 (0x0D08)
Notify user mandatory program Please Work is about to run execmgr 12/11/2006
12:14:08 PM 3336 (0x0D08)
Execution Request for program Please Work state change from WaitingContent
to NotifyExecution execmgr 12/11/2006 12:14:08 PM 3336 (0x0D08)
Executing program osdlaunch.exe in Admin context execmgr 12/11/2006 12:14:10
PM 3884 (0x0F2C)
Execution Request for program Please Work state change from Running to
Running execmgr 12/11/2006 12:14:10 PM 3884 (0x0F2C)
Invalid username, missing domain name execmgr 12/11/2006 12:14:10 PM 3884
(0x0F2C)
Checking content location \\HQSMS01\SMSPKGE$\FSS0000E\ for
use execmgr 12/11/2006 12:14:10 PM 3884 (0x0F2C)
Successfully selected content location
\\HQSMS01\SMSPKGE$\FSS0000E execmgr 12/11/2006 12:14:10 PM 3884 (0x0F2C)
Executing program as a script execmgr 12/11/2006 12:14:10 PM 3884 (0x0F2C)
Successfully prepared command line
"\\HQSMS01\SMSPKGE$\FSS0000E\OSDLaunch.exe" execmgr 12/11/2006 12:14:10
PM 3884 (0x0F2C)
Command line = "\\HQSMS01\SMSPKGE$\FSS0000E\OSDLaunch.exe", Working
Directory = \\HQSMS01\SMSPKGE$\FSS0000E\ execmgr 12/11/2006 12:14:10 PM 3884
(0x0F2C)
Created Process for the passed command line execmgr 12/11/2006 12:14:11
PM 3884 (0x0F2C)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
{
AdvertisementId = "FSS20019";
ClientID = "GUID:C512A59D-330E-4B90-A0F8-B8C68B6AFEF9";
CommandLine = "\"\\\\HQSMS01\\SMSPKGE$\\FSS0000E\\OSDLaunch.exe\"";
DateTime = "20061211171411.220000+000";
MachineName = "DELETE-FDEB";
PackageName = "FSS0000E";
ProcessID = 1520;
ProgramName = "Please Work";
SiteCode = "FSS";
ThreadID = 3884;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "\\\\HQSMS01\\SMSPKGE$\\FSS0000E\\";
};
execmgr 12/11/2006 12:14:11 PM 3884 (0x0F2C)
Raised Program Started Event for Ad:FSS20019, Package:FSS0000E, Program:
Please Work execmgr 12/11/2006 12:14:11 PM 3884 (0x0F2C)
Program exit code 0 execmgr 12/11/2006 12:14:12 PM 3336 (0x0D08)
Looking for MIF file to get program status execmgr 12/11/2006 12:14:12
PM 3336 (0x0D08)
Script for Package:FSS0000E, Program: Please Work succeeded with exit code
0 execmgr 12/11/2006 12:14:12 PM 3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramCompletedSuccessfullyEvent
{
AdvertisementId = "FSS20019";
ClientID = "GUID:C512A59D-330E-4B90-A0F8-B8C68B6AFEF9";
DateTime = "20061211171412.064000+000";
MachineName = "DELETE-FDEB";
PackageName = "FSS0000E";
ProcessID = 1520;
ProgramName = "Please Work";
SiteCode = "FSS";
ThreadID = 3336;
UserContext = "NT AUTHORITY\\SYSTEM";
};
execmgr 12/11/2006 12:14:12 PM 3336 (0x0D08)
Raised Program Success Event for Ad:FSS20019, Package:FSS0000E, Program:
Please Work execmgr 12/11/2006 12:14:12 PM 3336 (0x0D08)
Execution is complete for program Please Work. The exit code is 0, the
execution status is Success execmgr 12/11/2006 12:14:12 PM 2136 (0x0858)

After that log, I check in the event viewer and see under the system log
that the osdagent_service was sent a start control, started, stops, and then
gives me "The OSDAgent_Service service terminated with the following error:
.

Relevant Pages

  • RE: OSD Image Deployment via SMS advertisement (cannot connect to
    ... I rebuilt my test machine, advertised my package to it, and it's now ... showing the new software account as the username when trying to deploy the ... put in the advanced client network access account field. ... OS Deployment advertisement failed to install OS Deployment agent!. ...
    (microsoft.public.sms.swdist)
  • RE: OSD Image Deployment via SMS advertisement (cannot connect to
    ... advanced client network access account and it works. ... during the package execution for an OSD image deployment via an ...
    (microsoft.public.sms.swdist)
  • RE: OSD Image Deployment via SMS advertisement (cannot connect to
    ... I setup a local account on the ... The clients didn't refresh the network access account and kept ... advanced client network access account and it works. ... during the package execution for an OSD image deployment via an ...
    (microsoft.public.sms.swdist)
  • RE: OSD Image Deployment via SMS advertisement (cannot connect to
    ... One log tells you the account that is being used ... test machine and push the package again. ... OS Deployment advertisement failed to install OS Deployment agent!. ... Raising event: ...
    (microsoft.public.sms.swdist)
  • Re: MSSecure.cab
    ... My Sync Host is my Site Server. ... >> permission to the SMSCliToknAcct& local account. ... >> Package Data Source directory and the package object. ... >>> Richard Threlkeld ...
    (microsoft.public.sms.admin)
Loading