Re: Distribution Problem FAILED

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Shehzad Khoja [MSFT] (srkhoja_at_online.microsoft.com)
Date: 12/20/04 

Date: Mon, 20 Dec 2004 08:37:38 -0800

>From the log, I can see a run for VNC program. You care running a program in
Admin context with this command line
\\DUBLIN\SMSPKGC$\00100007\vnc-3.3.6-x86_win32.exe

Are you sure there are not command line parameters for this executable? I
would assume that this program without any parameters will only display a
dialog box for the user to click and actually iinstall. Can you run this
command line manually on your machine and see if it installs the program
(without any user interaction) or displays a dialog box to the user to
click?

If it displays you that dialog box (which I suspect is happening) then you
need to find out command line parameters for this program which would tell
this program to install silently without any user interaction. Another this
you can try is to slect "Allow user to interact with this program" setting
on Environmnent tab of Program property page. This setting will allow you to
see the program execution if program is showing any dialog boxes (or any
UI). With this, I must warn you that this may result in a security issue
commonly known as "Shatter Attack"
http://www.microsoft.com/technet/Security/news/htshat.mspx

Hope this helps. 

-- 
This posting is provided "AS IS" with no warranties, and confers no rights.
"Owen Heart" <owen_heart73@yahoo.com> wrote in message 
news:cq65p8$3li$1@reader01.singnet.com.sg...
> Hi,
>
> Here is the execmgr.log file.  I try to deploy Acrobat Reader, Winzip and
> VNC, all failed to installed becuase I don't say any of the program on the
> client machine. Time Zone has been verify. Not only on one machine, in 
> fact,
> on all machine for Advance Client which I doing.
>
> I did notice that one of the last application which I try is VNC. The 
> system
> did show up that in the Advertisetment program is going to run in 5 
> mintues.
> I waited for that machine to have the VNC Installed but it didn't get
> installed. After which I go to the Run Advertisment Program, none of the
> application is listed nor in the Add/Remove Program.
>
> What is the problem why all the 3 application FAILED?  The user is a 
> Domain
> User with no local administrive rights.
>
> As we know that VNC which download from internet required User 
> Intervension
> to Click Next, but since I have selected Administrative in the Run mode
> ONLY, why can't the software get installed itself automatically and just
> proceed.
>
> Similarly, Winzip require local administrative rights but being a local
> user, which have no administrative rights, how can the software get
> installed automatically.
>
> Pls Advise.
>
> Thanks.
>
>
>
>
>
>
>
> ![LOG[A user has logged on.]LOG]!><time="13:29:45.830+000" 
> date="12-20-2004"
> component="execmgr" context="" type="1" thread="672"
> file="execreqmgr.cpp:3648">
> <![LOG[The logged on user is 
> NWTRADERS\user2]LOG]!><time="13:29:48.901+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="672"
> file="execreqmgr.cpp:3666">
> <![LOG[Policy arrived for parent program Winzip
> 9.0]LOG]!><time="13:51:06.125+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1472" file="execreqmgr.cpp:4879">
> <![LOG[Raising event:
> [SMS_CodePage(437), SMS_LocaleID(1033)]
> instance of SoftDistProgramOfferReceivedEvent
> {
> AdvertisementId = "00120007";
> ClientID = "GUID:D97ECFFD-3C6F-47C9-A70B-35819FFB62BD";
> DateTime = "20041220055106.206000+000";
> MachineName = "CLIENT2";
> ProcessID = 1468;
> SiteCode = "001";
> ThreadID = 1472;
> };
> ]LOG]!><time="13:51:06.237+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1472" file="event.cpp:522">
> <![LOG[The user has logged off.]LOG]!><time="13:53:38.111+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="568"
> file="execreqmgr.cpp:3878">
> <![LOG[A user has logged on.]LOG]!><time="13:54:22.891+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="340"
> file="execreqmgr.cpp:3648">
> <![LOG[The logged on user is 
> NWTRADERS\user2]LOG]!><time="13:54:22.901+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="340"
> file="execreqmgr.cpp:3666">
> <![LOG[Execution Manager timer has been
> fired.]LOG]!><time="13:54:38.821+000" date="12-20-2004" 
> component="execmgr"
> context="" type="1" thread="340" file="execreqmgr.cpp:4234">
> <![LOG[The user has logged off.]LOG]!><time="13:58:02.392+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="1924"
> file="execreqmgr.cpp:3878">
> <![LOG[A user has logged on.]LOG]!><time="14:00:22.193+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="460"
> file="execreqmgr.cpp:3648">
> <![LOG[The logged on user is 
> NWTRADERS\user2]LOG]!><time="14:00:23.514+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="460"
> file="execreqmgr.cpp:3666">
> <![LOG[A user has logged on.]LOG]!><time="15:20:46.083+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="1928"
> file="execreqmgr.cpp:3648">
> <![LOG[The logged on user is 
> NWTRADERS\user2]LOG]!><time="15:20:47.942+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="1928"
> file="execreqmgr.cpp:3666">
> <![LOG[Policy is updated for Program: Winzip 9.0, Package: 00100005, 
> Advert:
> 00120007]LOG]!><time="15:33:15.089+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="1788"
> file="execreqmgr.cpp:5022">
> <![LOG[Policy arrived for parent program Acrobat
> 5.5]LOG]!><time="15:58:25.194+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="404" file="execreqmgr.cpp:4879">
> <![LOG[Raising event:
> [SMS_CodePage(437), SMS_LocaleID(1033)]
> instance of SoftDistProgramOfferReceivedEvent
> {
> AdvertisementId = "00120008";
> ClientID = "GUID:D97ECFFD-3C6F-47C9-A70B-35819FFB62BD";
> DateTime = "20041220075825.254000+000";
> MachineName = "CLIENT2";
> ProcessID = 1472;
> SiteCode = "001";
> ThreadID = 404;
> };
> ]LOG]!><time="15:58:25.274+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="404" file="event.cpp:522">
> <![LOG[Policy arrived for parent program 
> VNC]LOG]!><time="16:30:10.387+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="256"
> file="execreqmgr.cpp:4879">
> <![LOG[Mandatory execution requested for program VNC and advertisement
> 00120009]LOG]!><time="16:30:10.501+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="1604"
> file="execreqmgr.cpp:2718">
> <![LOG[Creating mandatory request for advert 00120009, program VNC, 
> package
> 00100007]LOG]!><time="16:30:10.552+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="1604"
> file="execreqmgr.cpp:2811">
> <![LOG[Raising event:
> [SMS_CodePage(437), SMS_LocaleID(1033)]
> instance of SoftDistProgramOfferReceivedEvent
> {
> AdvertisementId = "00120009";
> ClientID = "GUID:D97ECFFD-3C6F-47C9-A70B-35819FFB62BD";
> DateTime = "20041220083010.532000+000";
> MachineName = "CLIENT2";
> ProcessID = 1472;
> SiteCode = "001";
> ThreadID = 256;
> };
> ]LOG]!><time="16:30:10.573+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="256" file="event.cpp:522">
> <![LOG[Requesting content from CAS for package 00100007 version
> 1]LOG]!><time="16:30:10.698+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1604" file="contentaccesshelper.cpp:136">
> <![LOG[Raising event:
> [SMS_CodePage(437), SMS_LocaleID(1033)]
> instance of SoftDistWaitingContentEvent
> {
> AdvertisementId = "00120009";
> ClientID = "GUID:D97ECFFD-3C6F-47C9-A70B-35819FFB62BD";
> DateTime = "20041220083012.046000+000";
> MachineName = "CLIENT2";
> PackageName = "00100007";
> PackageVersion = "1";
> ProcessID = 1472;
> ProgramName = "VNC";
> SiteCode = "001";
> ThreadID = 1604;
> };
> ]LOG]!><time="16:30:12.066+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1604" file="event.cpp:522">
> <![LOG[Successfully raised SoftDistWaitingContentEvent event for program
> VNC]LOG]!><time="16:30:12.098+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1604" file="executionrequest.cpp:1791">
> <![LOG[Execution Request for program VNC state change from NotExist to
> WaitingContent]LOG]!><time="16:30:12.098+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="1604"
> file="executionrequest.cpp:367">
> <![LOG[Content is available for program 
> VNC.]LOG]!><time="16:30:12.554+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="1672"
> file="executionrequest.cpp:3713">
> <![LOG[Notify user mandatory program VNC is about to
> run]LOG]!><time="16:30:12.554+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="1672" file="executionrequest.cpp:2141">
> <![LOG[Execution Request for program VNC state change from WaitingContent 
> to
> NotifyExecution]LOG]!><time="16:30:12.834+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="1672"
> file="executionrequest.cpp:367">
> <![LOG[Executing program vnc-3.3.6-x86_win32.exe in Admin
> context]LOG]!><time="16:35:13.528+000" date="12-20-2004" 
> component="execmgr"
> context="" type="1" thread="148" file="executionrequest.cpp:2296">
> <![LOG[Execution Request for program VNC state change from Running to
> Running]LOG]!><time="16:35:13.528+000" date="12-20-2004" 
> component="execmgr"
> context="" type="1" thread="148" file="executionrequest.cpp:367">
> <![LOG[Checking content location \\DUBLIN\SMSPKGC$\00100007\ for
> use]LOG]!><time="16:35:13.706+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="148" file="executioncontext.cpp:1194">
> <![LOG[Successfully selected content location
> \\DUBLIN\SMSPKGC$\00100007]LOG]!><time="16:35:13.973+000" 
> date="12-20-2004"
> component="execmgr" context="" type="1" thread="148"
> file="executioncontext.cpp:1262">
> <![LOG[Executing program as a script]LOG]!><time="16:35:13.973+000"
> date="12-20-2004" component="execmgr" context="" type="1" thread="148"
> file="executionengine.cpp:79">
> <![LOG[Successfully prepared command line
> "\\DUBLIN\SMSPKGC$\00100007\vnc-3.3.6-x86_win32.exe"]LOG]!><time="16:35:14.0
> 33+000" date="12-20-2004" component="execmgr" context="" type="1"
> thread="148" file="scriptexecution.cpp:330">
> <![LOG[Command line = 
> "\\DUBLIN\SMSPKGC$\00100007\vnc-3.3.6-x86_win32.exe",
> Working Directory =
> \\DUBLIN\SMSPKGC$\00100007\]LOG]!><time="16:35:14.033+000" 
> date="12-20-2004"
> component="execmgr" context="" type="1" thread="148"
> file="scriptexecution.cpp:178">
> <![LOG[Created Process for the passed command
> line]LOG]!><time="16:35:14.260+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="148" file="scriptexecution.cpp:220">
> <![LOG[Raising event:
> [SMS_CodePage(437), SMS_LocaleID(1033)]
> instance of SoftDistProgramStartedEvent
> {
> AdvertisementId = "00120009";
> ClientID = "GUID:D97ECFFD-3C6F-47C9-A70B-35819FFB62BD";
> CommandLine =
> "\"\\\\DUBLIN\\SMSPKGC$\\00100007\\vnc-3.3.6-x86_win32.exe\"";
> DateTime = "20041220083514.290000+000";
> MachineName = "CLIENT2";
> PackageName = "00100007";
> ProcessID = 1472;
> ProgramName = "VNC";
> SiteCode = "001";
> ThreadID = 148;
> UserContext = "NT AUTHORITY\\SYSTEM";
> WorkingDirectory = "\\\\DUBLIN\\SMSPKGC$\\00100007\\";
> };
> ]LOG]!><time="16:35:14.349+000" date="12-20-2004" component="execmgr"
> context="" type="1" thread="148" file="event.cpp:522">
> <![LOG[Raised Program Started Event for Ad:00120009, Package:00100007,
> Program: VNC]LOG]!><time="16:35:14.359+000" date="12-20-2004"
> component="execmgr" context="" type="1" thread="148"
> file="executioncontext.cpp:301">
> <![LOG[Execution Manager timer has been
> fired.]LOG]!><time="16:37:56.201+000" date="12-20-2004" 
> component="execmgr"
> context="" type="1" thread="1588" file="execreqmgr.cpp:4234">
>
>
> "Shehzad Khoja [MSFT]" <srkhoja@online.microsoft.com> wrote in message
> news:eYweISU5EHA.3472@TK2MSFTNGP09.phx.gbl...
>> Hi Owen
>>
>> Notifying user that SMS is about to install a program in x minutes is an
>> option available to adminitrator which you can configure to increase the
>> time (decrease the time from 5 minutes to 1 minute) or don't display that
>> notice at all. This setting is available on the second tab of Advertised
>> Program Client Agent settings property page.
>>
>> As for your second issue here visio is not installed, please check
>> ExecMgr.log on the client (SMSAPM32.log in you are using legacy client).
>> Also you can some information about what SMS did after notifying user 
>> from
>> Status messages from the reporting point. If you are not familiar with 
>> SMS
>> logs then post ExecMgr.log and we can help you troubleshoot this issue.
>>
>> Hope this helps.
>>
>> -- 
>> This posting is provided "AS IS" with no warranties, and confers no
> rights.
>>
>>
>> "Owen Heart" <owen_heart73@yahoo.com> wrote in message
>> news:cq1g5i$r6s$1@reader01.singnet.com.sg...
>> >
>> > Hi,
>> >
>> > I deploy the Visio Viewer to the client machine, the client did 
>> > received
>> > the
>> > Advertisement, however it say the program will run in 5 mintues,  and
>> > still
>> > count down but it did not run at all, what is the possible cause?  The
>> > user
>> > did not click the advertised program icon appear, However i waited for
> 10
>> > minutes and the software did not install automatically. In addition, 
>> > the
>> > advertisement program does not appear Visvo viewer.  Why is that so?
>> >
>> > I only select "Run with Administrative rights" Only and whether user or
>> > not
>> > is log in.
>> >
>> > In what situtation will the program when deploy appear in the advertise
>> > program and in what situtation it will not? Also how do i get rid of
> some
>> > of
>> > the advertised program which have the old application which say
>> > sucessfully?
>> >
>> >
>> > Pls advise.
>> >
>> > Tks.
>> >
>> >
>>
>>
>
>

Relevant Pages

  • Re: [SLE] vnc - "connection refused" - SOLVED
    ... What I ended up doing was to put the command into ~/.profile. ... As far as wm, I'm starting fvwm2, and on the client side "vncviewer ... >>I'm trying to figure out if vnc requires additional steps, ... you have to start a VNC server explicitly. ...
    (SuSE)
  • Re: what could "use up" X forwarding connections?
    ... The error comes from any X client I try to run ... under an ssh -X command started from inside the VNC session. ...
    (Fedora)
  • Re: Distribution Problem FAILED - HELP SHED SOME LIGHTS TO ME. MILLION OF TKS.
    ... dialog box asking "Install VNC" for Yes and No on Win2k and up machines. ... I would ask you to run this command line manually to ... > Worst still on the Windows 2000 Professional, the advertisement progrma m ...
    (microsoft.public.sms.swdist)
  • Re: Remote mvBase Access...
    ... and straightforward - requires no software installatiom on the client (it ... >>Depends on the firewall/ router, so I can't really comment specifically. ... > them through installation of VNC or similar on their machine. ... IIRC on port 5500). ...
    (comp.databases.pick)
  • No X-Session provided by VNC
    ... But I cannot get VNC to run and provide an X session. ... screen that has a console session window in a light gray box. ... removing from list! ... 01/09/2005 09:34:44 Got VNC connection from client 70.161.66.98 ...
    (alt.os.linux.suse)