Re: Site Boundaries

Steve thx for reply

my subnet mask is 24 bit ( 255.255.255.0) and I defined separate IP for each
site in site boundaries and when i click on client properties the ip subnet
is 10.11.0.0
even thou is not specified in Site boundaries.

I used sitebound.exe to import the subnets, it would take me forewer to type
in all these IP sunbnets

"Steve Thompson" wrote:

"GS Warrior" <GS Warrior@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DDAE2D3F-43A1-493B-8B93-D1041651A878@xxxxxxxxxxxxxxxx
I deployed SMS 2003 ( one central site, two primary and so far 21
secondary
sites). So far everything is fine but ( ofcourse):

problem with Site Assigment:

i am using only IP subnets to set Site boundaries. but i have some
clients,
better to say 40% of clients are not assigned. :( i made sure the site
boundaries are not overlapping and odd thing is lets say i have clients
on
10.11.7.* subnet and one client with ip 10.11.7.88 is showing as assigned
and
client with ip 10.11.7.77 is not assigned.

If i set 10.11.0.0 is Site Boundaries all of the clients get "assigned =
yes" but that is not good setup cause i have a lot different sites using
subnets 10.11.*.*. So i'd like to set up boundaries with acctual subnet
not
10.11.0.0 (wich includes every subnet)

any thoughts?

yes :)

any thoughts?

What is your subnet mask?? Client assignment is made based on the client
side ip address and subnet mask... so in your scenario if you had a subnet
mask of:

255.255.0.0

all of those clients should assign.

However, if your subnet mask is:

255.255.255.0

you'll need to define a separate ip address for each class c boundary. Do
check out the sitebound.exe utility from the sms 2003 toolkit 2, it'll allow
you to import/export lists of ip subnets.

Steve



.

Relevant Pages

  • Re: Site boundaries and subnetting
    ... when the discovery finds the client it is discovered with subnet 10.96.0.0 ... instead of 10.96.4.0 and therefore the client is not assigned. ... MVP Windows Server System - SMS ... Since I added 10.9.4.0 to the site boundaries the clients are not ...
    (microsoft.public.sms.admin)
  • Re: Site boundaries and subnetting
    ... I would expect that the client would evaluate its own subnet mask regardless ... MVP Windows Server System - SMS ... Can this effect the way a client subnet mask is shown in SMS? ... Since I added 10.9.4.0 to the site boundaries the clients are not ...
    (microsoft.public.sms.admin)
  • RE: SBS client updates over WAN remote sites
    ... User Wizard for the remote users on the SBS 2003 server, ... client applications such as Internet Explorer 6.0, Microsoft Office Outlook ... You can apply the following software on the subnet 10.0.2.0 using Group ...
    (microsoft.public.windows.server.sbs)
  • Re: Quick FRS question
    ... You define a subnet, create a site ... You can see if a client is obtaining/ ascertaining the correct site ... None of the DFS roots get heavy use, no more then 10 people at a time, it's just that they are connected by very slow lines. ... it is called 'Net> Mask Ordering' in the DNS options. ...
    (microsoft.public.windows.server.active_directory)
  • RE: RWW Issues w/SBS2003
    ... I reconfigured the routers on the LAN, placing them on the same subnet. ... This fixed the RWW connect to clients/server issues, ... From your description, we know, the issue relate to the router between ... please connect a client on the subnet A with the same ...
    (microsoft.public.windows.server.sbs)
Loading