Re: SMS Heirachy

Hi,

If you access \\SiteB\Sms_Site that way you are using your credentials and
not the site servers. So that is not a valid test. You might want to try
with SysInternals psexec tool (psexec.exe /s cmd.exe) that way you can run a
process with the credentials of local system.

Are you creating a new standard sender address?

Thanks
Lars Norman Søndergaard

"mungoblack" <mungoblack@xxxxxxxxxxxxxxxxxxxxxxxxx> skrev i en meddelelse
news:5D9BCD40-A15C-4635-AC3A-D447F52B55AB@xxxxxxxxxxxxxxxx
> Yes my mistake, i meant replicate to site B!
>
> Its the addresses setup that im having a problem with. Its here that if i
> try and setup a standard address when i select the drop down box i dont
> see
> the other site to choose?
>
> The access denied is not in a log file. If on site A i goto Start - RUN
> and
> then type in \\siteB\sms_site should i not be able to access this standard
> folder because the permissions show i should be able to, as Site A's
> computer
> account is a member of the sms_sitetosite group on SiteB?
>
> Thanks
>
> "Cathy Moya [MS]" wrote:
>
>> First, I think you mean "replicate the packages down to site *B*", right?
>>
>> It sounds like you are going to the general tab of the site properties
>> and
>> trying to select the site and it isn't showing up in the drop down box.
>> Is
>> that correct? If that's true, it's usually because you don't have an
>> address
>> configured. Addresses are one-way trips. At site A, you have to configure
>> an
>> address to site B, and at site B, you have to configure an address to
>> site
>> A. The address will use the sender, but having a sender is not enough.
>>
>> I'm not sure where you are seeing access denied. Is that in a log file?
>> If
>> so, which one?
>>
>> --
>> Cathy Moya, CISSP, MCSE: Security
>> Technical Writer, Windows Enterprise Management Division User Assistance
>>
>> Check out the SMS Technical FAQ:
>> http://www.microsoft.com/technet/prodtechnol/sms/sms2003/techfaq/default.mspx
>> This posting is provided AS IS with no warranties and confers no rights.
>>
>> "mungoblack" <mungoblack@xxxxxxxxxxx> wrote in message
>> news:1131723212.061878.74640@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
>> >I have 2 primary sms 2003 sp1 sites running in advanced security both
>> > in the same forest. I want site A to be the main site and site B to be
>> > a child site so that i can replicate packages down to site A.
>> >
>> > Both servers can talk to each other. I have put the site servers
>> > computers account in the others sitetosite group. The standard senders
>> > are setup. When i go to setuip and Address and select the drop down box
>> > I cannot see the other SMS site? If on site A i goto \\siteB\sms_site i
>> > get an access denied, and its the same the other way round even though
>> > the sitetosite group should have full permissions on that folder?
>> >
>> > Can somebody help with the steps i need to take for these 2 sites to
>> > communicate with each other?
>> >
>> > Regards
>> >
>>
>>
>>


.