Re: Installing SMS 2.0 on a 2003 Server

From: Roger Crawford (rcrawford_at_nospam.scci.com)
Date: 02/19/04 

Date: Wed, 18 Feb 2004 20:17:11 -0600

Jerel
     No I am running this from the Desktop when I start the install I get
the error you are talking of and I hit continue. Then it gives me the error
that it has detected that Terminal Server is running and this needs to be in
intsall mode. Which we don't have TS running and we haven't even enabled the
Remote Admin part. But it stops right there and will not let me continue
with the install.Thanks

Roger Crawford
HTS

"Jerel Frauenheim [MSFT]" <jerelf@online.microsoft.com> wrote in message
news:OfTAJfn9DHA.3292@TK2MSFTNGP11.phx.gbl...
> Roger,
>
> Are you trying to install SMS 2.0 from a remote console? You may have to
> log on directly on the server to do the initial installation.
>
> You will see a message that SMS 2.0 SP2 (Since that is the last full
> version)is not verified on Windows 2003. Ignore or continue through that
> message. Then apply SP5 immediately after installation and you should be
> fine.
>
> Thanks,
>
> Jerel
>
> --
> Jerel Frauenheim
> Microsoft Corporation/SMS
>
> This posting is provided "AS IS" with no warranties, and confers no
rights.
>
> "Roger Crawford" <rcrawford@nospam.scci.com> wrote in message
> news:urCApym9DHA.1504@TK2MSFTNGP12.phx.gbl...
> Yes I have went in and looked and Terminal Server is not selected.
> "Atif Gul [MS]" <atifgul@online.microsoft.com> wrote in message
> news:ebpzWsm9DHA.4084@tk2msftngp13.phx.gbl...
> Please verify from Add / Remove Programs and then Add / Remove Windows
> Components that terminal server is not installed.
>
>
>
>
>
> --
> Disclaimer
> This posting is provided "AS IS" with no warranties, and confers no
rights.
>
>
> "Roger Crawford" <rcrawford@nospam.scci.com> wrote in message
> news:%23fpR2Xm9DHA.2480@TK2MSFTNGP12.phx.gbl...
> > No we have not installed Terminal Services. This is a clean install
fresh
> > and we did not enable that. When we run that command it tells us
"Install
> > Mode does not apply to Terminal Server configured for remote
> Administration"
> > Which we don't have the server so we can connect remotely to it with the
> > Remote Admin piece. If you look in Services it does show Terminal Server
> > running but no options to shut it down. We can disable it but it warns
it
> > could effect the operation of the server. Thanks
> >
> >
> > Roger Crawford
> > HTS
> > "Atif Gul [MS]" <atifgul@online.microsoft.com> wrote in message
> > news:Occ6zQm9DHA.1632@TK2MSFTNGP12.phx.gbl...
> > > Run the following command line and then install the SMS
> > >
> > > change user /install
> > >
> > > You have installed Terminal Services, check the following link for
more
> > > information on Terminal Services
> > >
> > > http://support.microsoft.com/?kbid=278513
> > >
> >
>
http://www.microsoft.com/windowsserver2003/technologies/terminalservices/default.mspx
> > >
> > >
> > > SMS can not be installed on the Terminal Server which is in execute
> mode.
> > >
> > > Thanks
> > >
> > >
> > > --
> > > Disclaimer
> > > This posting is provided "AS IS" with no warranties, and confers no
> > rights.
> > >
> > >
> > > "Roger Crawford" <rcrawford@nospam.scci.com> wrote in message
> > > news:uJ%23e%232l9DHA.2028@TK2MSFTNGP10.phx.gbl...
> > > > We have SMS 2.0 and when we try to install this on our new Windows
> 2003
> > > > Server it says the server needs to be in Install Mode for Terminal
> > > Services.
> > > > We do not have this running on the server just the Remote Management
> > part
> > > is
> > > > running and we have that so no one can connect. I did read where you
> can
> > > > install this on the server and then have to apply SP 5 to this for
it
> to
> > > > operate Properly but what do I need to do to get by this error?
Thanks
> > > >
> > > > Roger Crawford
> > > > HTS
> > > >
> > > >
> > >
> > >
> >
> >
>
>

Relevant Pages

  • RE: TS 2003 at SBS 2003 DC
    ... While I agree with Patrick that a fresh install is probably the ... MCSE, CCEA, Microsoft MVP - Terminal Server ... > locally on TS but not however remotely (via RDP). ... > are SBS remote one of operator, ...
    (microsoft.public.win2000.termserv.apps)
  • Re: Changing from App mode to Remote Admin mode via registry
    ... applications on the terminal server. ... Remote admin mode is simply activated by going ... Microsoft MVP - Terminal Server ... We'd like to do this because our application doesn't install right now in ...
    (microsoft.public.windows.terminal_services)
  • Terminal server keeps expirering
    ... in remote admin you need a licencing ... By installing programs on a terminal server, ... without requiring Terminal Server Licensing. ... >Wizard to install and configure a terminal server. ...
    (microsoft.public.windows.server.general)
  • Terminal server keeps expirering
    ... in remote admin you need a licencing svr, ... Using a terminal server, users in remote locations can run ... Wizard to install and configure a terminal server. ... Server Licensing, your terminal server will stop accepting ...
    (microsoft.public.windows.server.general)
  • Re: Changing from App mode to Remote Admin mode via registry
    ... You can detect if your application is running in a remote ... MCSE, CCEA, Microsoft MVP - Terminal Server ... Remote Administration mode for a Win2K3 terminal server without ... users not to install from a remote session? ...
    (microsoft.public.windows.terminal_services)
Loading