Re: SMS Clients - Workgroup - Not getting policy

ClientLocation*******************
Not showing any error messages
*******************
LocatonServices*******************
Attempting to retrieve proxy MP from AD LocationServices 2007/09/12 8:47:00
AM 604 (0x025C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:00
AM 604 (0x025C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:00
AM 604 (0x025C)
Attempting to retrieve local MP from AD LocationServices 2007/09/12 8:47:00
AM 604 (0x025C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:00
AM 604 (0x025C)
Executing Task LSRefreshDefaultMPTask LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
Attempting to retrieve default management point from
AD LocationServices 2007/09/12 8:47:06 AM 524 (0x020C)
Attempting to retrieve default management point from
WINS LocationServices 2007/09/12 8:47:06 AM 524 (0x020C)
Attempting to retrieve NLB default management point from
WINS LocationServices 2007/09/12 8:47:06 AM 524 (0x020C)
Failed to resolve IP address from WINS LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
No NLB default management point is present, attempting to resolve default
management point from WINS LocationServices 2007/09/12 8:47:06 AM 524 (0x020C)
Failed to resolve IP address from WINS LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
Failed to retrieve MP for site code 'G00' LocationServices 2007/09/12
8:47:06 AM 524 (0x020C)
Attempting to retrieve proxy MP from AD LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:06
AM 524 (0x020C)
Attempting to retrieve local MP from AD LocationServices 2007/09/12 8:47:07
AM 524 (0x020C)
Unable to retrieve AD site membership LocationServices 2007/09/12 8:47:07
AM 524 (0x020C)
Failed to send request to /SMS_MP/.sms_aut?MPKEYINFORMATION at host
SERVERNAME.ABC.CORP.123.COM LocationServices 2007/09/12 8:47:07 AM 524
(0x020C)
HTTP ERROR:
URL=http://SERVERNAME.ABC.CORP.123.COM/SMS_MP/.sms_aut?MPKEYINFORMATION,
Port=80, Code=12007,
Text=ERROR_WINHTTP_NAME_NOT_RESOLVED LocationServices 2007/09/12 8:47:07
AM 524 (0x020C)
*******************
Also, noticed that when I used the MPGetPolicy utility it gets back alot of
PolicyID(s) but when I go to select one of these the right hand pane says
"Proxy Authentication Required".

Thanks for your help...........Jason


"Kim Oppalfens [MVP]" <""Kim dot Oppalfen" wrote:

Jason Steeves wrote:
There's only the 2 inital items. It appears they're not getting the policy as
all of the components are showing up as installed and this should get
changed. I have also ensured that they're using the correct wins servers and
that the SLP can be resolved.

"Kim Oppalfens [MVP]" <""Kim dot Oppalfen" wrote:

So the clients are assigned to the correct site?
How many actions do you see in the control panel applet?

Jason Steeves wrote:
Also, the MP is functioning correctly as my machines in the domain are
functioning correctly and I'm only having problems with some machines that
are in workgroups; and having the same problem with different workgroup
machines trying to connect to different SMS primary servers.

"Miguel Rodriguez [CC]" wrote:

have you set up the advanced client network access account?

--
Miguel Rodriguez Eicke
_________________________
Senior Technology Specialist
ComputaCenter Hannover


"Jason Steeves" wrote:

I have some workstations that are at a site and these machines are in a
workgroup and are not getting policy. These machines have 0 items in run
advertised programs and do not have the sms client configured. I have checked
the following:
* site boundaries has correct IP subnets specified
* machines can ping sms servers
* machines can access MP URL tests as long as FQDN is used for server name
* DP and SLP entries are created in WINS and machines can resolve them
* auto site assignment works
* wmi tests OK
* initiaited machine policy retrieval and evaluation cycle.

Please advise if I'm missing something that needs to be checked. I ran the
MPTroubleshooter and it failed on "Verify the Default Website is Running" and
"If the MP is W2k3: Verify that the BITS Web Extensions are enabled". Both of
these items failed with "Cannot create ActiveX component". Also, CAS.log is
showing "Software Distribution Site Settings for the client are missing from
WMI.".

Thanks in advance for your help...........Jason

--
"Everyone is an expert at something"
Kim Oppalfens - Sms Expert for lack of any other expertise
Windows Server System MVP - SMS
http://www.blogcastrepository.com/blogs/kim_oppalfenss_systems_management_ideas/default.aspx

what is in clientlocation or locationservices log?


--
"Everyone is an expert at something"
Kim Oppalfens - Sms Expert for lack of any other expertise
Windows Server System MVP - SMS
http://www.blogcastrepository.com/blogs/kim_oppalfenss_systems_management_ideas/default.aspx

.

Relevant Pages

  • Re: Advanced Client: Unable to enable installed components
    ... Try downloading the sms 2003 toolkit 2 and run the mp troubleshooter. ... >> Okay, the clientlocation.log is okay, and I also think that the ... >> Attempting to retrieve NLB default management point from ...
    (microsoft.public.sms.misc)
  • Problem with advanced client and HTTP
    ... I have SMS 2003 installed, ... I know that the advanced client is installed because I ... the site and the management point. ... <![LOG[Attempting to retrieve proxy MP from AD]LOG]! ...
    (microsoft.public.sms.admin)
  • Re: Site Code Not Discovered.
    ... There is a Troubleshooting Management Points whitepaper on the SMS website ... installing a management point. ... DHCP Setup - are the clients looking at a specific DHCP Server ...
    (microsoft.public.sms.admin)
  • Re: An observation...anyone agree?
    ... can increase his production by 30%. ... management, lagistics, machine repair/maintanance, etc... ... I could increase any cnc machines output by 30%. ...
    (alt.machines.cnc)
  • Re: ACL on Interfaces
    ... I've got 10 machines that are dual homed. ... whereas the Management Int. ... Baseline Security Analyzer traffic all come from Management Int. ... change anything with the network cards on those servers. ...
    (microsoft.public.windows.server.security)
Quantcast