Re: MP problems following sms hardware move

Hi PocketJacks,


I have the same problem as you. We moved the SMS site system to a new
hardware. I am about to following the fix the knowledge base recommended.
I noticed you ran into problems after following the articles. What did you
do to fix the HTTP request, and he default website - SMS_slp AND
sms_DP_SMSPKGE$?
Do you have any suggestions?

Thanks for your help.



"PocketJacks" wrote:

I ran through the KB article mentioned previously and now I'm
receiving the following error (every hour) in the
SMS_MP_Control_Manager:

MP Control Manager detected MP is not responding to HTTP requests. The
http error is Service Unavailable.


Also from the Default website I am missing now the SMS_SLP and
SMS_DP_SMSPKGE$. These were present before completing the KB article.

I am running through the suggested fixes but if you have any ideas
I'd greatly appreciate it?


Steve Thompson wrote:
I'd run through the steps we mentioned...

ST
"PocketJacks" <dallano@xxxxxxxxxxx> wrote in message
news:1164210014.251885.95870@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Steve\Torsten

Very helpful replies ... much appreciated.

I had tried removing and re-adding the Management Point component to no
avail.
I double-checked all IIS requirements and even re-installed BITS but I
didn't completely re-install IIS.

Unfortunately, before I saw your replies I ended up manually installing
the Management Point using the command: MPsetup.exe /install
/siteserver:<servername>

This worked fine from looking at the mpsetup.log and I received no more
errors in the SMS_MP_Control_Manager. All the components are now
install under IIS.
When I run the MPTroubleshooter from the Toolkit 2 I receive 1 error on
the Post-Implementation tab:

"BITS Server Extensions are not enabled on <servername>"

I have checked and these are enabled under IIS - Web Extensions. Any
ideas?

Is there any other MP tests I should carry out or would you recommend I
still follow the KB article?

Thanks again




Steve Thompson wrote:
"Torsten [MVP]" <torsten.meringer@xxxxxxxxxxxxx> wrote in message
news:wdamd93p28au.1ofbp6zvq3grp$.dlg@xxxxxxxxxxxxx
you could also have a look at this kb article that desribes what Steve
mentioned: http://support.microsoft.com/kb/922367/en-us

That took 17 steps, for my 2 sentences :-)

Thanks for the kb reference!

Steve



.

Relevant Pages

  • Re: IIS ASP.NET 2.0 Bug
    ... problem SO YOU CAN FIX IT. ... I will obviously not be fixing IIS even if I ... I did appreciate your help in telling me how to turn Casini off. ... The purpose, when you debug, is to identify problems. ...
    (microsoft.public.dotnet.framework.aspnet)
  • RE: Not able to see clients as advanced clients
    ... you want to remove is the site role called "management Point Role". ... It depends where SMS was originally installed. ... which the server would use when it's a client (of SMS or other ... things that use BITS), not the "IIS BITS Server Extensions", which would not ...
    (microsoft.public.sms.installer)
  • RE: MS01-035 Hot Fix for IIS
    ... MS01-035 Hot Fix for IIS ... was identified in the patch for MS01-035 last week. ... Further, if the administrator does select it for installation, a ...
    (Bugtraq)
  • Re: WSUS 3.0 SP1 and the Monitoring/Reporting.
    ... I am looking at the IIS management program, expanded the web sites node - ... Do yo even have the ASP.NET tabs in your default web site in IIS visible? ... presented an error message for about 30 minutes after the upgrade. ... I cannot get the "Monitoring and Reporting" section of "Server ...
    (microsoft.public.windows.server.sbs)
  • Re: ASP.NET app permissions
    ... "Failed to start monitoring file changes" - Watch out for fix described ... The default page was set up correctly in IIS. ...
    (microsoft.public.inetserver.iis.security)