Re: Advanced Client install nightmare

Hi,

Yes definately, there is nothing in the Policies that would prevent the
client being installed. We have no machine level policies configured except
to disable the messenger service and there is no other policies that would
prevent installation.
I have previously successfully installed a client over the network, it has
just stopped working!

I have made no other changes to the AD etc. to cause this as far as i know.
The only things i have done is to give the accounts full control over the
right OUs.
--
IT Engineer



"Santos Martinez" wrote:

how about your AD Policies, everything is good in that part too.


--
Santos Martinez,MCSE, MCDBA, MCTS
IT Community Staff of Puerto Rico
http://www.itcspr.org



"Jonathan" wrote:

Hi,

The user and computer account both have full control permissions over both
System and Systems management. (I did this when installing)
In the Systems management OU i have :

SMS-MP-001-SCAT-SMS
SMS-SLP-001-SCAT-SMS
SMS-SITE-001

Inside the SMS-MP and SMS-SLP folders there is nothing. Should there be some
data in here?

Cheers
--
IT Engineer



"Santos Martinez" wrote:

Can you verify your AD, for System and System Managment OU, if the Machine$
and the SMS2003 have permissiones to it and if the MP was created under the
OU of System Management, if not give permissions to this two accounts on the
System or System Management OU since System Management Inherits from the
system OU and then, verify is some erros comes to the Site Setting, also how
your AD policy are you restricting remote registry installations or something
like it.

regards,

--
Santos Martinez,MCSE, MCDBA, MCTS
IT Community Staff of Puerto Rico
http://www.itcspr.org



"Jonathan" wrote:

Hello again!

I can succesfully connect to the remote registry using the account. I have
created an account called SMS2003 for this purpose and added it to boht
Domain Admins and now Enterprise Admins. Domain Admins are also local admins
on all of our machines so this should be ok.

When logged on as SMS2003 i can connect to everything without a problem. Is
there anything else that could possibly be causing this? It is a really
annoying problem! Is there any other log files i should be looking in for
causes?

Thanks for all your help guys, really appreciated!
--
IT Engineer



"Kim Oppalfens <MVP>" wrote:

Try remotely connecting to the registry of one of these machines using the
sms2003 account.

Trust me it is not.
The below error occurs if your computers are only member of a single group,
usually domain computers.


--
Kim Oppalfens
Telindus Belgium
MVP Windows Server System - SMS
"Jonathan" <Jonathan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:E36AD158-D8D7-40E9-9BBE-8B64B22BECFB@xxxxxxxxxxxxxxxx
Hi,

I can successfully connect to the Admin$ share of every machine using the
account specified in the Client push installation properties.

I am also getting the following errors now, in the
SMS_AD_SYSTEM_GROUP_DISCOVERY_AGENT log, : (Message ID 5503)


MS Active Directory System Group Discovery Agent reported errors for 603
objects. DDR's were generated for 603 objects that had errors while
reading
non-critical properties. DDR's were not generated for 0 objects that had
errors while reading critical properties.

Possible cause: The SMS Service might not have access to some properties
of
this object. The container specified might not have the properties
available.
Solution: Please verify the Active Directory schema for properties that
are
not replicated or locked. Refer to the discovery logs for more
information.

It looks like it is relateed to me!



--
IT Engineer



"Kim Oppalfens <MVP>" wrote:

try manually connecting to the admin$ share using the sms2003 account
from
your sms server.

--
Kim Oppalfens
Telindus Belgium
MVP Windows Server System - SMS
"Jonathan" <Jonathan@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:2D32F33C-8CD7-4017-A821-B670E45F53C8@xxxxxxxxxxxxxxxx
Hi again,

I have deleted and re-created the client install account and the client
connection account but am still seeing the same errors!

I have reset the counters for the CLIENT_CONFIG_MANAGER log, is this
the
same as clearing the status messages? Or is there a different way.

I am still getting the same errors in the CCM.log


--
IT Engineer



"Diwan" wrote:

Hi

First of all clear your status messages from SMS server as Santos
told.

other thing look bad is.
look like you have missed the remote client installtion account.
recreate it and double check, it happens.

Warning: no remote client installation or SMS service account found
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight

Time><thread=3768 (0xEB8)>


thanks,

Diwan

Jonathan wrote:
Hi,

there are lots of errors in the site status under
SMS_CLIENT_CONFIG_MANAGER
stating that SMS either cannot find the clients

SMS Client Configuration Manager cannot find machine "SCAT-000956"
on
the
network. The operating system reported error 53: The network path
was
not
found.

Or a similar error which states that access is denied.

Here is more info from the ccm log :

Received request: "SCAT-003321.SCAT" for machine name: "SCAT-003321"
on
queue: "Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:43.176
2006
GMT Daylight Time><thread=2992 (0xBB0)>
Error event time has expired for Request "SCAT-003321.SCAT" for
machine
"SCAT-003321". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:43.176
2006
GMT Daylight Time><thread=2992 (0xBB0)>
Stored request "SCAT-003321.SCAT", machine name "SCAT-003321", in
queue
"Processing". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176
2006 GMT
Daylight Time><thread=2992 (0xBB0)>
WARNING: High volume of CCRs. Slowing down the queue processing
thread~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.176 2006 GMT
Daylight
Time><thread=2992 (0xBB0)>
Received request: "ZBUFWQR1" for machine name: "SCAT-002291" on
queue:
"Incoming". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208
2006
GMT
Daylight Time><thread=2988 (0xBAC)>
Stored request "ZBUFWQR1", machine name "SCAT-002291", in queue
"Processing". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208
2006 GMT
Daylight Time><thread=2988 (0xBAC)>
WARNING: High volume of CCRs. Slowing down the queue processing
thread~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:43.208 2006 GMT
Daylight
Time><thread=2988 (0xBAC)>
---> ERROR: Unable to connect to remote registry for machine name
"10.3.1.128", error 53. $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:52.895 2006 GMT Daylight Time><thread=3768 (0xEB8)>
---> ERROR: Unable to access target machine for request: "Z61FJZP2",
machine
name: "SCAT-001117", error code: 53
$$<SMS_CLIENT_CONFIG_MANAGER><Fri
Aug 11
07:49:52.895 2006 GMT Daylight Time><thread=3768 (0xEB8)>
Retry request id for "Z61FJZP2" set to "SCAT-001117.SCAT"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight
Time><thread=3768 (0xEB8)>
Stored request "SCAT-001117.SCAT", machine name "SCAT-001117", in
queue
"Retry". $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006
GMT
Daylight Time><thread=3768 (0xEB8)>
<======End request: "SCAT-001117.SCAT", machine name: "SCAT-001117".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight
Time><thread=3768 (0xEB8)>
======>Begin Processing request: "Z6FKB7JW", machine name:
"SCAT-003683"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight
Time><thread=3768 (0xEB8)>
---> Trying each entry in the SMS Client Remote Installation account
list~
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight
Time><thread=3768 (0xEB8)>
---> Warning: no remote client installation or SMS service account
found
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:52.895 2006 GMT
Daylight
Time><thread=3768 (0xEB8)>
Submitted request successfully $$<SMS_CLIENT_CONFIG_MANAGER><Fri
Aug
11
07:49:53.176 2006 GMT Daylight Time><thread=2992 (0xBB0)>
Getting a new request from queue "Retry" after 100 millisecond
delay.
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.176 2006 GMT
Daylight
Time><thread=2992 (0xBB0)>
Found CCR "SCAT-003322.SCAT.CCR" in queue "Retry".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.176 2006 GMT
Daylight
Time><thread=2992 (0xBB0)>
WARNING: A request for machine 'SCAT-002291' is already in the
processing
list. Merging CCR Data. $$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11
07:49:53.208 2006 GMT Daylight Time><thread=2988 (0xBAC)>
Failed to submit request for processing (52)
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT
Daylight
Time><thread=2988 (0xBAC)>
Deleted request "ZBUFWQR1", machine name "SCAT-002291"
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT
Daylight
Time><thread=2988 (0xBAC)>
Getting a new request from queue "Incoming" after 100 millisecond
delay.
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT
Daylight
Time><thread=2988 (0xBAC)>
Found CCR "zby1qegf.CCR" in queue "Incoming".
$$<SMS_CLIENT_CONFIG_MANAGER><Fri Aug 11 07:49:53.208 2006 GMT
Daylight
Time><thread=2988 (0xBAC)>

I am really tearing my hair out with this one, we did a complete
setup
.

Relevant Pages

  • Re: Client Push keeps failing
    ... verified all of the permissions seem correct. ... No network access account provided. ... I thought that at first too and yet the SMS console still shows this ... I am trying to get the client push to work and it keeps failing. ...
    (microsoft.public.sms.admin)
  • Re: Advanced Client install nightmare
    ... I can succesfully connect to the remote registry using the account. ... MVP Windows Server System - SMS ... I have deleted and re-created the client install account and the client ... Slowing down the queue processing ...
    (microsoft.public.sms.admin)
  • Re: After reinstallation
    ... If you manually install the client and open the system manager in control ... See Ccm.log on site server ... SMS Active Directory System Group Discovery Agent reported errors for 3 ... The MP installation was succesful, ...
    (microsoft.public.sms.setup)
  • Re: Client Push keeps failing
    ... I thought that at first too and yet the SMS console still shows this ... Above messages showed that the ccmsetup ran on the client machine ... I have already setup a "SMSPUSH" user account and it is added to the ... I am able to login to the SMS server using the SMSPUSH user account ...
    (microsoft.public.sms.admin)
  • Re: Adv Client with Workgroup Computers
    ... I was trying to use the SMS tools from the SMS server to initiate harware ... Inv for example the account is a domain account but the Client PC is in a ... Is there a procedure for installing the ADV client localy on a workgroup ... I have manually added to the WINS server. ...
    (microsoft.public.sms.admin)